Hydraulic Longhole Drilling Rig, KS311 Manufacturer

Hydraulic Longhole Drilling Rig, KS311

Request a Quote

About Us: http://ksdrillmachine.com/1-5-1-hydraulic-long-hole-drilling-rig.html

Dimensions (L×W×H): 9700×2300×3300mm
Weight: 16000kg
Gradeability: 14°

KS311 hydraulic longhole drilling rig is mainly used for long hole drilling and bolting tasks, and it is suitable for underground mines and tunnels with a height range of 3.5m-5m and a width range of 3.5m-5m. This hydraulic longhole drilling rig is capable of 360-degree boom rotation, and configured with swing boom mechanism and guide rail to achieve full 360-degree hole drilling and horizontal coverage with parallel holding of 3 meters, it is versatile for a variety of mining applications.

Structure Diagram

Technical Specifications

Dimensions and weight		Drilling system
Length	9700mm	Rock drill (drifter)	1×HC95LH
Width	2300mm	Impact power	24kW
Height	3300 mm	Impact flow	138L/min
Weight	16000 kg	Impact pressure	200bar
Travelling speed, level	10 km/h	Max. rotary pressure	210bar
Gradeability	14°	Impact frequency	48-57hz
Electric Hydraulic pump unit		Torque	955Nm
Electric motor	75kW	Hole diameter	51-64mm	64-76mm	89-102mm
Impact/feed/positioning	Variable axial piston pump	Drill rod	R32	T38	T45
Turn around	Gear pumps	Rod length	1220mm	1525mm	1830mm
Filter precision	10μ	Boom length	3200mm	3500mm	3800
Hydraulic oil tank	240L	Feed extension	900mm	1200mm	1200mm
Hydraulic cooler	Water cooler	Drilling depth	30m	36m	36m
Working pressure	380V	Boom	Down 20° hypsokinesis65°
Frequency	50Hz	Beam rotation	360°
Starting method	Star/delta	Drill area	±1500mm
Cable reel	1×K440	Air and water system
Cable capacity of the reel	80m	Air Compressor	1×JN4
Diameter of cable	32mm	Capacity	0.5m3/min
Cable specifications	3×50 3G10	Pressure	5-7bar
Carrier		Device of shank lubrication	Four-wheel drive
Diesel engine	Cummins QSB3.9-C125 93kW/2200rpm	Air consumption for lubrication	0.3m3/min
Exhaust purification	Exhaust catalyzer	Oil consumption for lubrication	180-250g/h
Drive system	Four-wheel drive	Water Pump	1×CR10
Tires	12.00-20	Power	5.5kW
knuckle mechanic	Articulated steering ±40°	Pump Capacity	8m3/h
Travel brake	Hydraulic brake	Safe protection
Parking brake	Wet multidisc brake	Noise level	< 100 dB(A)
Fuel tank	90L	Lifting safety roof	Meet the requirements of FOPS and ROPS

Features

The feed beam is supported by hydraulic cylinders to ensure the smooth drilling operation; The hydraulic guide cylinders are used to ensure that bores are drilled with near perfect straightness;
The articulated chassis with hydraulic drive system is suitable for small to medium-sized tunnels;
Stepped piston is used in rock drill (drifter), which helps increase drilling speed, improve the efficiency of impact energy transfer from drill to rock, and reduce the consumption of drilling tools while maintaining the condition of the drill rig;
Rod handling system with a capacity of carrying up to 27 drill rods, and drilling depth can reach 42 meters;
The hydraulic longhole drilling rig is configured with medium/low pressure hydraulic drifters from Montabert. Hydraulic hoses and seals do not operate in high pressure conditions since the hydraulic drifter works under low oil pressure, thus resulting in prolonged service life, high reliability and less maintenance cost when compared to high pressure hydraulic drifter;
Low-emission Cummins diesel engine paired with hydraulic four-wheel-drive transmission system is included in the hydraulic longhole drilling rig, achieving stepless speed adjustment, high gradeability and fast walking speed;
The exhaust purification device is equipped to greatly improve the underground working environment;
Dual-circuit wet multi-disc service brake and multi-pad parking brake provide safe braking and high stability; In addition, emergency stop buttons at multiple points significantly enhance the safety during underground mining and tunneling operations;
The compact structure of the drilling rig makes steering more flexible, the powerful articulated chassis allows for steering angle of ±40° and rear axle swing angle of ±10°, enabling the drilling rig to easily pass through tunnels with a minimum width of 2.5m, and safely achieve right angle turns in a 3m wide tunnel;
The hydraulic longhole drilling rig has a centralized control panel which offers easy operation and gives operator good visibility; In addition, the function of remote control cable control improves the operation safety and maneuverability;