Hydraulic Drilling Rig

Hydraulic Drilling Rig
Request a Quote
Brief Introductions of YDX-5C Hydraulic Drilling Rig

The YDX-5C hydraulic drilling rig is mainly designed for prospecting solid mineral deposits. It adopts advanced technology in wire line coring and is driven with rotator. YDX-5C hydraulic drilling rig is widely used in geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.

Technical Features of Hydraulic Drilling Rig
  • Adopt the world famous hydraulic pumps, valves and motors.
  • There are two kinds of chassis: tyre-traction (with steering gear) and self-propelled steel crawlers.
  • Hydraulic cylinder is adopted for lifting/lowering.
  • When transported and located, the mast can be folded. The mast could work stably with foot clamp touching the earth.
  • Hydraulic drilling rig adopts load sensitive system and is equipped with high-position operation platform and operation hole platform (i.e. low-position operation platform).
  • The rotator is fed and driven with a system connecting the spindle and oil cylinder with chain. It has the following function: if the piston rod of oil cylinder moves one certain distance, the spindle will double the distance. The rotator is equipped with a four-speed gear shift, and hydraulic pressure with stepless speed change can adjust its speed. As to the rig, in its up part, it is equipped with centering guide; in its lower part is a guide. At the operation hole of the lower platform, a hydraulic clamp is adopted.
Main Technical Parameters of Hydraulic Drilling Rig YDX-5C
Hole Depth of Hydraulic Drilling Rig (meters)
Drilling Capacity HWT/PWL:680 meter HRQHP/HQ :1000 meter NRQHP/NWL:1300 meter BRQHP/BQ: 1500 meter
Prime mover
Standard Unit Cummins 6CTA8.3-C195 (turbocharged and charge water cooled)
Displacement 8.3L
Power (Maximum) 145kW(198hp)
Rated RPM(Factory setting) 1,900 rpm
TORQUE and RPM RATINGS of Hydraulic Drilling Rig
(Hydraulic motor at maximum/minimum displacement, prime mover at 2,200 rpm)

Rpm Nm
Low-speed Gear 125-360 4150-1600
High-speed Gear 395-1050 1450-550
HYDRAULIC SYSTEM
Primary Pump Package Axial Piston variable displacement Triplex pump for driving of Drill Head Rotation,Main Hoist, Mud Pump & Line Winch.
Maker: SAUER-DANFOSS
1st Pump: 150LPM at 28.5MPa
2nd Pump: 120LPM at 25MPa
3rd Pump: 102 LPM at 25MPa
Side Pump Package Duplex gear pumps feeding oil for hydraulic outriggers,upper and foot clamps, Drill Head Rotation and main hoist following, Rotator floating control system.
Maker: Changyuan Hydraulic
1st Pump: 12LPM at 20MPa
2nd Pump: 8LPM at 10MPa
Hydraulic Tank
Capacity 420 L
DRILL HEAD
Rotation Motor Double Hydraulic Motor-variable/Reversible Maker: SAUER-DANFOSS
Mechanical Transmission Funk 2 speeds
Ratios 1st8.776: 1 2nd2.7 16:1
Head Opener Pivoting style, Manual actuated
Hydraulic Chuck(PQ) Hydraulically opened, Disc Spring Clamping, Normally Closed Type
Axial Holding Capacity of222 400 N
Hold Diameter 121mm
DRILL MAST AND FEED SYSTEM
Mast Height 10.3m
Slippage Stroke 1100mm
Feed Stroke Length 3200 mm
Feed Pull 15000kg
Feed Thrust 7500kg
Rod Pull 3m or 6m
Mast Adjusting Angle 0o - 90o
Drilling Angle 45o - 90o
DRAW WORKS for Hydraulic Drilling Rig
Main Line Winch – driven with parallel motors
Hook Load (single part line) Bare Drum 7700kg
Hoisting Speed (single part line) Bare Drum 38-70m/min
Main Line Winch Cable Dia 18mm
Main Line Winch Cable Length 50m
Wire-line Hoist
Line PullBare Drum 1200kg
Line Speed Bare Drum 164 m/min
Wire-line Hoist Cable Dia. 6mm
Wire-line Hoist Cable Length 1500m
Mud Pump
Type Reciprocating Pump Triplex Plunger
Stroke 100mm 250,145,90,52
Output volume (l.p.m)
Discharge pressure (Mpa) 2.5, 4.5,6.0, 6.0
Dimensions and Weight
Dimensions (for transportation) 5600×2240×2650mm (L×W×H)
Weight 7000kg
Related products
Send Message
Inquiry
Inquiry