Fully Automatic Insulating Glass Machinery Manufacturer

Fully Automatic Insulating Glass Machinery

Request a Quote

About Us: http://gbsealant.com/2-1-882-hollow-glass-silicone-sealant/index.html

This full automatic insulating glass machinery is equipped with a pressing plate which can expand and is easy to maintain. The washing unit is equipped with a spray system which makes enables a glass washing speed up to 10-12m/min. The pressing plates of the coupling press unit are welded with 2.75mm rectangular steel tube, its max automatic expanding distance is 60cm, thus it is applicable for manufacturing two-layer insulating glass, three-layer insulating glass, curtain wall insulating glass and special insulating glass.

Parameter

Model	GPL-XY2500Y-C	GPL-XY2000Y-C
Input Voltage	380V 50Hz	380V 50Hz
Total Power	23.5KW	19.5KW
Cutting Glass Size	2500×3500mm	2000×3000mm
Min Glass Size	300×450mm	300×450mm
Glass Thickness	4~18mm	4~18mm
Working Speed	8~48m/min	8~48m/min
Total Weight	7000kg	6200kg
Size of Line	18500×2660×3530mm	17000×2660×3030mm

Show details:

1. Pressing part:

1. Manipulators are used for glass uploading, which makes sure that the glass does not shift or break.
1. The active table is equipped with tracks. Its max opening distance is 60cm, so it is convenient to examine and repair.
1. The glass pressing unit is welded with 2.75mm rectangular tube.

2.Washing part:

1. The internal components and screws are all made of stainless steel, copper, anti-water alumina, wool fabric and so on, so they are durable and easy to maintain and repair.
1. The glass washing speed can up to 10-12m/min with 6 high-temperature fur brushes of 180mm diameter and 4 spray equipment.
1. The spray system can optionally adjust the spraying angle, which makes the maintenance more convenient.
1. The washing process can be automatically adjusted by stainless steel spring according to the glass thickness during the glass transmission process.

Features:

The cleaning machine is equipped with 3 pairs of fur brushes which are specialized for low emissivity glass and will not damage the film layer of glass during the cleaning process.
Cleaning cabinet, air drying cabinet and air nozzle are all made of stainless steel, so they are corrosion-resistant and have elegant appearance.
The equipment features a PLC control system, it adopts a touch screen, which can display the temperature and speed of water, production output and so on. And there will be prompt messaging on the display when an equipment errors is detected.

Maintenance

Clean the equipment every day, and sweep the surrounding environment of equipment.
Apply lubricating oil to transmission parts.
Check the electric wire joint of the equipment weekly, identify the points with potential errors.
Check the screw of transmission part joint monthly and fasten any loose screws.
Change the lubricating oil for reducer every six months.
Change the hydraulic fluid for hydraulic pressure system every year.
Sweep the dust for electronic control system and check the completeness.

Recommended matched equipment