GPL-Y Series Automatic Insulating Glass Production Line
Request a Quote
The glass conveying speed of this GPL-Y series automatic insulating glass production line can be precisely controlled by operators. The glass washing speed can reach up to 10-12m/min with 6 high-temperature fur brushes of 180mm in diameter. Its glass pressing machine can expand to 60cm, so it is convenient to maintain.
Parameter
Model | GPL-XY2500Y | GPL-XY2000Y |
Input Voltage | 380V 50Hz | 380V 50Hz |
Total Power | 30KW | 23KW |
Cutting Glass Size | 2500×3000mm | 2000×2500mm |
Min Glass Size | 300×450mm | 300×450mm |
Glass Thickness | 4~18mm | 4~18mm |
Working Speed | 8~48m/min | 8~48m/min |
Total Weight | 6500kg | 6000kg |
Size of Line | 17000×2600×3530mm | 15500×2600×3030mm |
Show details:
1.Pressing part:
-
- Trajectory and gear are used for glass fastening, which is very stable and reliable.
-
- The pressing unit is welded by 2.75mm rectangular tube.
-
- Manipulators are used for glass uploading, which makes sure that glass pieces are not dislocated or broken.
2.Washing part:
- 6 fur brushes are equipped with 6 motors for precise control
- The speed of washing machine can be adjusted.
- There are two layers at the bottom of cleaning part, which effectively prevent water leaking.
- The spray direction of spray system can be adjusted and washing machine water cabinet is equipped with heating system.
Features:
- The activated plate of pressing machine can automatically expand and is easy to maintain.
- The glass washing machine is equipped with 3 pairs of fur brushes which are specialized for Low emissivity glass and will not damage the film layer of glass during cleaning process.
- It is applicable for manufacturing two-layer insulating glass, three-layer insulating glass, curtain wall insulating glass and special insulating glass.
- The whole equipment adopts PLC control system, it adopts touch screen as display screen, which can display the temperature and speed of water, production output and so on. And there will be prompt message on the display when equipment errors happen.
- Operators can control the glass transport speed, and this production line is equipped with buffer storage area which can minimize the waiting time of operators and increase the production efficiency.
Maintenance
- Clean the equipment every day, and sweep the surrounding environment of equipment.
- Apply lubricating oil to transmission parts.
- Check the electric wire joint of the equipment weekly, identify the points with potential errors.
- Check the screw of transmission part joint monthly and fasten any loose screws.
- Change the lubricating oil for reducer every six months.
- Change the hydraulic fluid for hydraulic pressure system every year.
- Sweep the dust for electronic control system and check the completeness.
Recommended matched equipment
Related products
Send Message
Most Recent
More
Other Products
Videos