Drilling Rig (YDX-6)

Drilling Rig (YDX-6)
Request a Quote
Brief Introductions of YDX-6 Drilling Rig

Our YDX-6 drilling rig has a hydraulic driving system. It is equipped with tracks. With a reasonable structure, its power head is driven by a variable motor and its speed is adjustable for 2 gears. This product enjoys the following advantages: low gravity center of the drill rig ensures a steady operation; in the range from 0° to 90°, the mast is adjustable to ensure a proper hole-drilling angle. Owing to the beautiful outline and special design, this product gains a worldwide popularity.

Main Features of YDX-6 Drilling Rig
  • We use well-known brands parts and auxiliary equipment, such as the engine, diesel engine, hydraulic pump, gear reducer and some key valves and hydraulic accessories to ensure the reliable quality.
  • Big torque, powerful driving force, rational and practical design, advanced controlling mode and a 6-meter-long drilling rod guarantee the high operation efficiency of the drilling rig.
  • The special design ensures the reduction of noise and other contamination (The noise can not be over 72db). This product is environmental friendly.
  • The advanced loading-sensor-controlling helps the rig save the energy. That is, cause the lowest driving force consumption and heat discharge.
Application Range of YDX-6 Drilling Rig

YDX-6 drilling rig can be applied to both slant and vertical drilling. Being a rig equipped with diamond and the carbide alloy drilling, it can be used in the fields of geology, metallurgy, coal mining, nuke industry and hydrology measuring.

Technical parameters of YDX-6 Drilling Rig
Hole Depth of Drilling Rig (meters)
Drilling Capacity HWT/PWL:1000 meter
HRQHP/HWL: 1300 meter
NRQHP/NWL: 1600 meter
BRQHP/BQ: 2000 meter
Prime mover
Standard Unit Cummins 6CTA (turbocharged and charge water cooled)
Displacement 8.3L
Power (Maximum) 178kW(240hp)
Rated RPM(Factory setting) 1,900
TORQUE AND RPM RATINGS
(Hydraulic motor at maximum/minimum displacement, prime mover at 2,200 rpm)

Rpm Nm
1st Gear 144-420 6400-1670
2ndGear 520-1100 1380-600
HYDRAULIC SYSTEM
Primary Pump Hydraulic pump: Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system. Maker: DANFOSS II Pump: Gear type: 40 LPM at 300 Bar.
Secondary Pump Axial Piston variable displacement duplex pump feeding oil for hydraulic Cylinder and control system. With load sensing system.
Maker: Changyuan Hydraulic II Pump: Gear type:30 LPM at 300 Bar.
Hydraulic Tank
Capacity 420 L
DRILL HEAD
Rotation Motor Double Huade Hydraulic Motor-variable/Reversible Maker: SAUER-DANFOSS
Mechanical Transmission Funk 2 speeds
Ratios 1st8.776:1 2nd2.716:1
Head Opener Pivoting style, Manual actuated
Hydraulic Chuck(PQ) Hydraulically opened, Disc Spring Clamping, Normally C Closed Type
Axial Holding Capacity of222 400 N
Hold Diameter 121mm
DRILL MAST AND FEED SYSTEM
Mast Height 10m
Slippage Stroke 1100mm
Feed Stroke Length 3200 mm
Feed Pull 30000kg
Feed Thrust 30000kg
Rod Pull 3m or 6m
Mast Adjusting Angle 0-90o
Drilling Angle 45o off horizontal to 90overtical down
DRAW WORKS
Main Line Winch – driven with parallel motors
Hook Load (single part line) Bare Drum 12000kg
Hoisting Speed (single part line) Bare Drum 38-70m/min
Main Line Winch Cable Dia. 21.5mm
Main Line Winch Cable Length 50m
Wireline Hoist
Line Pull Bare Drum 1500kg
Line Speed Bare Drum 38-70m/min
Wireline Hoist Cable Dia. 6.3mm
Wireline Hoist Cable Length 2000m
Mud Pump
Type Reciprocating pump Triplex Plunger
Stroke 110mm
Output volume (l.p.m) 320,230,165,118
Discharge pressure (Mpa) 4.0,5.0,6.0,8.0
Dimensions and Weight
Dimensions (for transportation) 5900×2240×2500mm (L×W×H)
Weight 9600kg
Related products
Send Message
Inquiry
Inquiry