High Strength Silicone Conformal Coating, ZS-NJ-D955
Request a Quote
High Strength Silicone Conformal Coating, ZS-NJ-D955
Description
The ZS-NJ-D955 RTV silicone conformal coating is a one part, low viscosity, room-temperature curing product.
- Cures to a tough, abrasion-resistant layer.
- The ZS-NJ-D955 RTV silicone conformal coating can be cured at a specific temperature or accelerated via solventless heating (less than 60℃).
- UV indicators are available to detect whether the coating is fully completed.
Typical applications
Protective coating for thick film circuitry, porous substrate and PCB.
Technical specs
| Uncured properties | Appearance | Transparent or translucent, flowable |
| Viscosity (cps) | 900~1100 | |
| Tack free time (min) | ≤10 | |
| Specific gravity (g/cm3) | 1.05～1.15 | |
| Cured properties | Hardness (Shore A) | 78～88 |
| Tensile strength (MPa) | ≥2.5 | |
| Elongation (%) | ≥50 | |
| Volume resistivity (Ω·cm) | ≥2.5×1013 | |
| Dielectric Strength (kV/mm) | ≥13 | |
| Dielectric constant (100kHz) | ≤2.5 |
Note:
- The performance data above are measured 7days after curing at 25℃ and 55% relative humidity.
- Zhaoshun cannot assume responsibility for different results obtained under different conditions or caused by product improvement.
Related products
Send Message
Most Recent
More
Other Products
Videos
