Thermally Conductive Silicone Adhesive, ZS-NJ-D935W
Request a Quote
ZS-NJ-D935W RTV Silicone Adhesive Sealant
Description
ZS-NJ-D935W RTV silicone adhesive sealant is a single-component, thermally conductive, dealcoholized silicone sealant which cures at room temperature. Designed with a high thermal conductivity coefficient to provide excellent adhesion to numerous metals including aluminum, stainless steel, etc. This sealant features outstanding dielectric property and thermal resistance in a temperature range of -60℃~200℃. The product produces alcohols when curing, but causes no corrosion to substrates like PC, copper, etc. Conforms to EU RoHS standards.
Typical applications
- Bonding chip to heat sinks
- Bonding intelligent control module of silicone controlled rectifiers to heat sinks
- Filling and bonding between high power electrical module and heat sinks
Technical specs
Uncured properties | Appearance | White, paste |
Tack free time (min) | ≤10 | |
Cure through time (d) | 3~7 | |
Cured properties | Specific gravity(g/cm3) | 2.00~2.15 |
Hardness (Shore A) | 78~88 | |
Tensile strength (MPa) | ≥2.0 | |
Shear strength (MPa) | ≥1.5 | |
Elongation (%) | ≥40 | |
Temperature resistance (℃) | -60~200 | |
Volume resistivity (Ω·cm) | ≥1.0×1014 | |
Dielectric Strength (kV/mm) | ≥13 | |
Thermal Conductivity [W/(m·k)] | ≥1.0 |
Note:
- The performance data above are measured 7 days after curing at 25℃ and 55% relative humidity.
- The product cures tack free more slowly as the storage time increases.
- Zhaoshun cannot assume responsibility for different results obtained under different conditions or caused by product improvement.
Related products
Send Message
Most Recent
More
Other Products
Videos