Solvent-Free Silicone Modified Conformal Coating, ZS-NJ-D916XX-1
Request a Quote
ZS-NJ-D916XX-1 RTV Silicone Conformal Coating
Description
- The NJ-D916XX-1 RTV silicone conformal coating is a single-component silicone sealant, which can be cured at room temperature or accelerated by heat.
- The ZS-NJ-D916XX-1 RTV silicone conformal coating features a low viscosity, making it easier for spray coating, dip-coating, brush coating or flow coating.
- Clear, transparent, low odor
- An outstanding temperature resistance allows this silicone conformal coating to retain its stability under a service temperature of -60℃～200℃.
- Conforms to EU RoHS and REACH standards.
Typical applications
This coating can be used to form a protective film layer onto electronic components and circuit boards for an excellent resistance to corrosion, dust, moisture, electricity leakage, short circuit, thermal shock, aging, and salt mist, and extends the service life.
Technical specs
| Uncured properties | Appearance | Translucent or canary, flowable |
| Tack free time (min)/25℃, 60%RH | ≤30 | |
| Viscosity (cps) | 700~1300 | |
| Cure through time (d) | 3～7 | |
| Cured properties | Hardness (Shore A) | 15～30 |
| Specific gravity (g/cm3) | 0.95～1.05 | |
| Temperature resistance (℃) | -60～200 | |
| Volume resistivity (Ω·cm) | ≥1.0×1013 | |
| Dielectric Strength (kV/mm) | ≥13 |
Note:
- The performance data above are measured 7days after curing at 25℃ and 55% relative humidity.
- Zhaoshun cannot assume responsibility for different results obtained under different conditions or caused by product improvement.
Related products
Send Message
Most Recent
More
Other Products
Videos
