GKV35 Sectional Directional Control Valves
Request a Quote
Features
- Valve body is made from grey cast iron (inlet module, work module, rear end cover)
- Spring ecap, mechanical detent cap and electrical or hydraulic pilot controlled module are made from cast aluminum or die-cast aluminum.
- Parallel circuit: each section feature a load check valve, optional inlet port with a overload valve or check valve.
- Overload protection valve for anti-cavitation.
- Series circuit is available.
- Optional control module: electric, hydraulic remote, manual and wire controlled.
- Available power beyond port.
- Can be modified to be a closed center.
- Optional operation mode: manual and wire pulling.
- Optional mechanical positioning.
- Inlet module can be equipped with a direct acting or pilot relief valve.
- Different functions of spools are provided to control two-way cylinder, one-way cylinder, or for hydraulic motor.
- Valve spool with floating function is available.
- Valve features small operating force and good flow characteristics.
- Section numbers: 1-8.
Specifications
Rated Flow | 35 L/min |
Max Flow | 40 L/min |
Min Flow | 10 L/min |
Max Pressure | 210 bar |
Internal leakage (70 bar) : A/B to T | 15-20 CC/min |
Internal leakage (70 bar) : A/B to T with P.O. Check | 2-5 CC/min |
Spool Stroke(1/2position) | +7/-7 mm |
with Floating Function(1/2 and F position) | +7/-7 -10 mm |
Solenoid can be either 12VDC or 24VDC, corresponding current is 0-1.5 or 0-0.75 Amp. |
Related products
Send Message
Most Recent
More
Other Products
Videos