Drive Through Bus Wash System (5-Brush)

Drive Through Bus Wash System (5-Brush)
Drive Through Bus Wash System (5-Brush)
Drive Through Bus Wash System (5-Brush)
Drive Through Bus Wash System (5-Brush)
Request a Quote

The drive through bus wash system with 5 brushes (CB-750) features a PLC fully-automatic computer system to improve the security and high pressure water system, which increases the washing speed. The bus system washes both buses and trucks using 4 lateral brushes and 1 overhead brush. Further details are shown in the table below.

Parameters
Model CB-750
Dimension L*W*H: 7210mm×5400mm×5500mm
Assembling Range L*W: 8000×6000mm
Air pressure 0.75~0.9MPa(7.5~9kg/cm²)
Voltage AC three-phase four-wire system
Voltage AC380V50Hz
Water supply DN25mm water flow rate≥120L/min
Ground flatness Deviation≤10mm
Washing method Drive through
Applicable Vehicles Container truck, box truck, bus
Applicable Car Dimension L (no limit) W≤3000mm H=3250mm
L (no limit) W≤3000mm H=4400mm
Washing Time 15-30 cars/h
Water consumption 180-240L/car
Advantages
  • The fully automatic PLC electronic control system improves the security.
  • A high pressure water system increases the washing speed.
  • The galvanized frame is extremely corrosion resistant.
  • A built in self-diagnosing system automatically detects and removes mechanical obstacles during the washing process.
Configurations
Standard Devices
Lateral brush motor
Overhead brush motor
Water pump
Drive motor
Equipment data intellectualization
Self-diagnose system
Related products
Send Message
Inquiry
Inquiry