KT6C Integrated Down the hole Drill Rig for Open Use
The KT6C Integrated down the hole drill rig for open use is an advanced drilling device integrating a down hole drilling system and screw air compression system. It features the typical compact structure found in our other products as well as excellent integrity and mobility. Equipped with a Cummins China stage III engine, the drill rig meets national standards for emissions and environmental impact. This outstanding machinery is characterized by high energy efficiency, safety, environmental-friendliness, flexibility, simple operation, and stability.
Brief Parameters
Drilling diameter: Φ80-105mm
Depth of economical drilling: 25m
Method of Feed: Oil cylinder-leaf chain
Feed stroke: 3000mm
Supporting power: Cummins QSB5.9-C210-30(154KW/210HP)
Stable hydraulic system
Model of drill rig | KT6C |
Drilling hardness | f=6-20 |
Drilling diameter | 80-105 mm |
Depth of economical drilling | 25 m |
Travelling speed | 2.5/4.0 km/h |
Climbing capacity | 30° |
Ground clearance | 430 mm |
Power of complete machine | 154 kW |
Diesel engine | Cummins QSB5.9-C210-30 |
Capacity of screw compressor | 10 m³/min |
Discharge pressure of screw compressor | 15 bar |
Outer dimensions (L×W×H) | 6500×2400×2600 mm |
Weight | 8000 kg |
Rotation speed of gyrator | 0-120 r/min |
Rotary torque | 1400 N*m |
Maximum push-pull force | 25000 N |
Lifting angle of drill boom | Up 54°, down 26° |
Tilt angle of beam | 125° |
Swing angle of carriage | Right 47 °, left 47° |
Lateral horizontal swing angle of carriage | Right -15°~97° |
Swing angel of drill boom | Right 53°, left 15° |
Leveling angle of frame | Up 10°, down 9° |
One-time advance length | 3000 mm |
Compensation length | 900 mm |
DTH hammer | M3 |
Drilling rod | φ64×3000 mm |
Method of dust collecting | Dry type (hydraulic cyclonic laminar flow) |
- Air Cleaner
- High torque gyrator
- Steel track adaptable to all terrains
- Easy Used Control Panel