30V 5A Hot Air Soldering Rework Station with DC Power Supply, Item WEP-853D

30V 5A Hot Air Soldering Rework Station with DC Power Supply, Item WEP-853D
Request a Quote

Description
The WEP-853D hot air soldering station is designed to carry out various treatments, including heat shrinkage, drying, pain removal, thawing, debonding, reheating, and rubber welding on different electronic components. It is integrated with a 30V/5A DC current, hot air gun and soldering iron. The control panel features an aluminum panel and the DC current display can be switched between mA/A.

Technical Parameters
Parameters
Rated voltage AC 220V±10% 50Hz
power ≤1000W
300℃The thermostat power of (high-speed PID programmable energy saving) 250W±10%
Working environment 0~40℃ relative humidity<80%
Storage environment -20~80℃ relative humidity<80%
Body size 255*188*125mm
Weight 7.26KG
Parts parameters Hot air gun Soldering iron
Work voltage AC 220V±10% 50Hz AC 26V±10% 50Hz
Output power 720W 75W
Temperature range 100℃~480℃ 200℃~480℃
Airflow type Brushless fan ---
Air Flow 120L/min(MAX) ---
Temperature Stability ±1℃ (Static) ±1℃ (Static)
Display Type Red LED display red LED display
Temperature correction type The PID digital program proofreading The PID digital program proofreading
PID Temperature correction cycle rapidly 20ms high-speed 100ms
Heating elements Ceramic skeleton heater Imported heater
Standard nozzles/tips (10mm,8mm,5mm,13mm) 4 PCS nozzles B
Tip ground impedance --- <2Ω
Tip of ground voltage --- <2mV
DC power supply
Output voltage 0~30V
Output current 0-5A adjustable
Protection type Short-circuit over-current
Voltage/ Current display type red LED display
Load stability < 0.01±2mv
Ripple dB < 1mvrms (virtual value)
Features
  • PID controller used for the real-time tracking of the air gun temperature and soldering iron temperature with high-speed 100ms cycle, and auto corrects the temperature with high stability.
  • High precision DC power supply: Output voltage: Adjustable between 0-30V DC, Output Current: Adjustable between 0-5A. The power supply is protected from overloading with high precision and reliability.
  • The power port comes with a voltmeter instead of using exterior precision digital voltmeter.
  • Handle protection function, the air gun and soldering iron handles have to be placed on the holder when powering on the rework station to begin normal functioning. The main reason is for safety if the handles are misplaced in dangerous locations.

If you need quick after-sales support


Please don't hesitate to send an email to !

Related products
Send Message
Inquiry
Inquiry