USB 3A Soldering Rework Station with four LED Display and Power Supply, Item WEP-853D Manufacturer

USB 3A Soldering Rework Station with four LED Display and Power Supply, Item WEP-853D

Request a Quote

About Us: http://yihua-soldering.com/2-2-wep-853d-soldering-station.html

Description
The WEP-853D soldering station comes equipped with a 5V USB port to connect with exterior equipment like USB lights or even for the power supply of devices like smartphones and tablets.

Technical Parameters

Parameters
Rated voltage		AC 220V±10% 50Hz
power		≤800W
300℃The thermostat power of (high-speed PID programmable energy saving)		250W±10％
Working environment		0～40℃ relative humidity＜80％
Storage environment		－20～80℃ relative humidity＜80％
Body size		255188125mm
Parts parameters	Hot air		Soldering iron
Work voltage	AC 220V±10% 50Hz		AC 26V±10% 50Hz
Output power	550W /700W		50W
Temperature range	100℃～480℃		200℃～480℃
Airflow type(853D) (853DA)	Brushless fan		---
Air Flow(853D) (853DA)	120L/min 28L/min(MAX)		---
Temperature Stability	±2℃ (Static)		±2℃ (Static)
Display Type	Red LED display		red LED display
Temperature correction type	The PID digital program proofreading		The PID digital program proofreading
PID Temperature correction cycle	rapidly 20ms		high-speed 100ms
Heating elements	Ceramic skeleton heater		Import heater
Tip ground impedance	---		＜2Ω
Tip of ground voltage	---		＜2mV
DC power supply
Output voltage		0~30V
Output current		0-3A
Protection type		Short-circuit over-current
Voltage display type		red LED display
Current display type		Red LED display
Load stability		< 0.01±2mv
Ripple dB		< 1mvrms(virtual value)

Features

Adopts the most advanced DC power protection system with short-circuit alarming and the power system will automatically back-up within 1 second after troubleshooting.
Equipped with a cellphone RF signal detector to prevent damage to cellphones.
The power port comes with a voltmeter instead of an exterior precision digital voltmeter.
Handle protection function, the air gun and soldering iron handles have to be placed on the holder when powering on the rework station to begin normal functioning. The main reason is for safety if the handles are misplaced in dangerous locations.

If you need quick after-sales support

Please don't hesitate to send an email to !