LED Digital Display Hot Air Soldering Rework Station, Item WEP-899D-II
Request a Quote
Description
The WEP-899D-II hot air rework station comes with a hot air gun and soldering iron, suitable for soldering and de-soldering components of SOIC (small outline integrated circuit), CHIP card, QFP (quad flat package), PLCC (plastic leaded chip carrier), BGA (Ball Grid Array), and SMD (surface mounted device). This hot air rework station has the special advantages of de-soldering mobile phone flex cables and flex cable boards.
Item | 899D-II |
Power | ≤700W |
Rated Voltage | AC 110V ±10% 60Hz/AC 220V~240V 50Hz |
Dimension | L148xW99x134mm ±5mm |
Weight | 2.8kg |
Work Environment | 0~40°C/32~104°F |
Storage Environment | -20~80°C/-4~176°F |
Storage Humidity | 35%~45% |
Hot air gun | |
Airflow Type | Brushless fan |
Airflow | ≤120L/min |
Temperature Range | 100°C~480°C |
Temperature Stability | ±2°C |
Display | Digital Display |
Wire Length | ≥100cm |
Noise Level | ≤45dB |
Soldering iron | |
Iron Power | 60W |
Temperature Range | 200°C~480°C |
Temperature Stability | ±1°C |
Output Voltage | 24V AC |
Display | Digital Display |
Wire Length | ≥100cm |
- Sleep Mode: The soldering rework station has a status self-detection function, if the equipment is in static motion for a set time, the system will go to sleep and the temperature of soldering iron & soldering wick will decrease to 200℃. This function can effectively prevent the soldering iron from oxidizing, which prolongs the lifespan as well as saves energy.
- Hot Air Gun Protection Function: The heater will stop heating if any abnormal situation happens for higher safety assurance.
- Cold/Hot Air Switch: Switch from cold or hot air by pressing the button, the cold air function is especially designed to cool down heated elements processing.
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Most Recent
More
Other Products
Videos