XHH-C310 Light Gauge Steel Framing Machine
Steel Frame Roll Forming Machine
XHH-C305/310 light gauge steel framing machine provides cold-formedform steel solutions to floor joist and trusses for residential and light commercial buildings. It is capable of producing 305/310 wide profiles, which features increased loading capacity by 10% compared to 89mm wide profiles and greatly saves steel. The machine comes with a production speed of 1.8t/h.
| Model | C305/310 |
| Dimension | 7600*1500*1700mm |
| Main Servo Motor Power | 22kW |
| Hydraulic Motor | 11kW |
| Forming Steps | 12Steps |
| Forming Speed | 15tons/8hours |
| Voltage | 380V/50Hz/3Phase |
| Effective Width | 305mm, 310mm |
| Material Width | 425mm |
| Flange Height | 50mm |
| Lip | 12mm |
| Material Thickness | G300-G450: 0.95-2.5mm G550: 0.95-2.0mm |
| Tolerance for Cutting and Punching | ±1mm |
| Tolerance for Forming | ±1mm |
| Control System | IPC computer controlling system |
| Design Software | Vertex Software |
| Rollers | Made using SKD-11 steel with heat treatment, plate hard chrome on the surface of rollers |
| Material for Shaft | SKD-11 |
| Material for Puncher | SKD-11 |
| Material for Cutter | SKD-11 |
-
-
Post punching mould
XHH LGS Machine all with post punching and post cutting, which make more high precision performance on position & dimension
-
-
Lower material wasting
Short distance between punching & cutting die limits the start-up material waste length at 0.2m, and end material waste length within 1 meter.
-
-
Save Cost
The length of each start-up waste of the XHH post-punching & cutting machine is about 1m. Most machines on the market are pre-punching & post-cutting (other suppliers), thus the waste material is about 8m on each start-up.
Start-Up/Change Steel Coil 8.11-12.13 kg 5 Steel Coils/Day 8.11-12.13 kg Material Saved/Year 12.17-18.2 T
- Main forming system
- 5 Tons Hydraulic Uncoiler
- Servo motor system
- IPC computer controlling system (Lenovo Laptop)
- Production software (1set)
- Design Software-Vertex, forever using license
- Hydraulic Automatic Punching Device (Lip Notch, Swage, Big Service Hole, Triple Web Hole, Triple Flange Hole)
- Hydraulic post-cutting device (material: SKD-11)
- Automatic printing device
- Run out table (4m)
