Servo Drive Press (Nominal force: 450kN~2000kN)

Servo Drive Press  (Nominal force: 450kN~2000kN)
Request a Quote

Description
SSP series servo drive presses are high-performance mechanical presses with independently developed by Yangli Group, with multiple motion curves and 100 sets of storable molds. It is not only applicable for shearing, punching, blanking, bending and shallow drawing operations, but also capable of realizing all kinds of special stamping needs and customizing motion curves.

In addition, the stamping press is also equipped with two-hand operation buttons and foot switch, realizing continuous, single and micro-inching operations.

Parameters
Type SCP-45 SCP-63 SCP-80 SSP-110 SSP-160 SSP-200
Nominal force kN 450 630 800 1100 1600 2000
Nominal stroke mm 4 4 5 4 4 4
Slide stroke mm 120 140 160 160 160 200
Number of continuous strokes under zero load Times/min -90 -80 -70 -70 -60 -50
Max. die height mm 270 300 320 350 350 450
Die height adjustment mm 60 80 80 80 110 110
Column spacing mm 550 560 640 1100 1140 1170
Bolster area (F.B × L.R) mm 440×810 580×900 580×1000 680×1000 740×1050 760×1070
Slide area (F.B × L.R) mm 340×410 400×480 420×560 500×650 580×770 680×800
Bolster thickness mm 110 110 120 140 150 160
Side frame opening (Dia.× Height) mm / / / 700×560 760×560 780×700
Air pressure Mpa 0.55 0.55 0.55 0.55 0.55 0.55
Configuration
  • Precision of complete servo press reaches JIS special grade precision.
  • The frame of the press is steel plate overall welded structure with excellent rigidity.
  • The crankshaft longitudinally placed to have short fulcrum distance features good stiffness.
  • The noise of overall machine is lower than 75dB.
  • Low-speed large-torque servo motor as power source improving the intelligence, automation degree of the mechanical press to guarantee the precision of pressed parts.
  • The die height is designed with electric adjustment and digital display, with a display precision of 0.01mm.
  • Rectangular hexahedral lengthened guide with high guide precision and precision retaining ability
  • Connecting rod with thread sleeve structure
  • The servo drive press adopts electric grease lubrication; the counterbalance cylinder employs manual oil lubrication to improve its service life.
  • Pneumatic components (filter regulator combination units, pressure regulating valve) are from SMC products.
  • Electrical control with continuous, single and micro-inching common operations.
Features of H frame press
  • Built-in 100 sets of molds storable, built-in 7 common motion curves including crankshaft mode, pressing mode, jog mode, single mode, quiet mode, repeated pressurization mode and multi-link mode. In addition, the system is designed to support advanced programming mode so that motion curves can be customized.
  • Transmission part is sealed inside the frame and due to which the noise of press machine is less than 78dB.
  • The slide is a cast box-shaped structure inside which the high-pressure oil cylinder is sealed with imported high-pressure oil seal to ensure no leakage of high-pressure oil.
  • Employ hydraulic overload protector that acts sensitively and reliably. Once the sheet metal machine tool is overloaded, the protective device relieves pressure right away and the slide stops moving, preventing the servo press and mold from being damaged.
  • SSP servo drive press can reset automatically after overloaded, which reduces shutdown time and improves the working efficieny of the press.
  • Pneumatic balance device is set up to reduce secondary impact, making the press machine running smoothly and thus improving its dynamic precision.
  • The crankshaft is put transversely, supported on four points, with good rigidity. Due to the large span of force points of connecting rod, the machine tool possesses strong anti-deviation load capacity.
Related
metal press, metalwork tools , metal manufacturing machine, pressing machine
Related products
Send Message
Inquiry
Inquiry