YONG-FENG F51 Automatic Hose Production Crimper

YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
YONG-FENG F51 Automatic Hose Production Crimper
Request a Quote

Application
The crimping force of the YONG-FENG F51 automatic hose production crimper is 3200KN, with an opening diameter of 118mm, a crimp range of 6~73mm and 14 sets of standard dies. YONG-FENG F51 crimpers are widely used for crimping high-pressure fuel pipes, industrial hoses, air conditioner hoses and bathroom hoses etc.

Max. inner diameter
Industrial hoses: 2½"
Hoses with 2 braided wires: 2"
Hoses with 4 spiral wires: 2"
Low pressure hoses φ6, φ8, φ10, φ12

Specification
Crimp head material FORGE STEEL
Crimp range 6-73mm
Hose size 2", 4SN
Max. Crimp range 118mm
Opening without dies 118mm
Opening +25mm
System pressure 31.5Mpa
Crimp force 3200kN
Drive 3kw/4kw
Standard voltage Customized
Control Full automatic
Standard dies 14 sets
Weight 270kg
L x W x H 820*510*1140mm

Specification of dies

High pressure dies:
No. Φ6 Φ8 Φ10 Φ13 Φ16 Φ19 Φ25 Φ32 Φ38 Φ51
Crimp range 15-25mm 18-28mm 20-30mm 23-33mm 26-36mm 29-39mm 37-47mm 46-56mm 51-61mm 63-73mm
Length 45mm 45mm 45mm 50mm 65mm 65mm 80mm 80mm 80mm 80mm

Low pressure dies:
No. Φ6 Φ8 Φ10 Φ12
Crimp range 6-16mm 8-18mm 10-20mm 12-22mm
Length 35mm 35mm 35mm 35mm

Details

Automatic hose production crimper
The cabinet can operate on the ground, following an ergonomic design. There is no need for an extra worktable, and the crimping operation is convenient. There is a special drawer for dies in the cabinet, which saves space and provides convenience for collecting dies for different applications.


Material
The oil cylinder cover, oil tank and piston rod are made of 40 chromium, with a surface hardness of HRC26-30 and an operation layer hardness of HRC59-63. The harden layer is 2mm thick.


Die connection
Our crimping dies are connected through magnetism, which makes it convenient for assembly and disassembly and allowing automatic positioning, and thus the crimping is neat and nice.


Related
hose crimper, hydraulic crimper, hose ferrule crimper, pipe crimper tool
Related products
Send Message
Inquiry
Inquiry