AWM3068 Glass Fiber Braid Silicone Rubber Wire

AWM3068 Glass Fiber Braid Silicone Rubber Wire
Request a Quote

Conductor: Bare, tinned copper
Insulator: Silicone rubber
Glass fiber braiding
Silicone resin coating
Rated voltage: 300V
Test voltage: 1500V. 15Min
Rated temp.: 150℃

Technical Parameters
AWG NO. Conductor Insulation thickness Braid mm Cable OD Resist.Ω/KMMax.
Size mm² Sturcture No./mm OD mm Nomianl mm OD mm Nominal mm Toler. mm
30 0.0507 7/0.10 0.30 0.38 1.10 0.15 1.40 ±0.10 374
28 0.0804 7/0.12 0.36 0.38 1.15 0.15 1.45 ±0.10 214
26 0.128 7/0.16 0.48 0.38 1.25 0.15 1.55 ±0.15 148
24 0.205 7/0.20 0.60 0.38 1.40 0.15 1.70 ±0.15 93
11/0.16
22 0.324 13/0.18 0.75 0.38 1.55 0.15 1.85 ±0.15 55
7/0.25
20 0.519 7/0.31 0.96 0.38 1.75 0.15 2.05 ±0.20 34.6
21/0.18
18 0.823 7/0.39 1.20 0.38 2.00 0.15 2.30 ±0.20 23.20
33/0.18
16 1.31 7/0.49 1.47 0.38 2.30 0.15 2.60 ±0.20 14.60
52/0.18 1.55 0.38 2.35 0.15 2.65
26 0.128 1/0.42 0.42 0.38 1.20 0.15 1.50 ±0.20 142.00
24 0.205 1/0.52 0.52 0.38 1.30 0.15 1.60 ±0.15 89.00
22 0.324 1/0.65 0.65 0.38 1.45 0.15 1.75 ±0.15 54.30
20 0.519 1/0.82 0.82 0.38 1.60 0.15 1.90 ±0.20 33.90
18 0.823 1/1.05 1.05 0.38 1.85 0.15 2.15 ±0.20 21.40
16 1.31 1/1.30 1.30 0.38 2.10 0.15 2.40 ±0.20 13.50

Mechanical Properties
Tensile strength: ≥3.45N/mm²
Elongation at break of insulation: ≥120%
Min. bending radius: 6×OD

Characteristics
AWM3068 glass fiber braid silicone rubber wire has very good flexibility and good performance of resistance to high temperature, ranging from -55℃ up to 180℃.
The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.
The braided synthetic yarn covering, which is applied directly over the insulation, gives the AWM3068 glass fiber braid silicone rubber wire, because of its short braiding pitch and high compactness, an excellent mechanical protection by maintaining good flexibility.
The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.
In the event of fire, no corrosive and toxic gases will be given off.
Hence, damage caused by fire can be kept to minimum.

Form
Related products
Send Message
Inquiry
Inquiry