MGS-H01/H16 Magnetic Guide Sensor Manufacturer

MGS-H01/H16 Magnetic Guide Sensor

Request a Quote

About Us: http://solution-sensor.com/1-1-magnetic-guide-sensor.html

Magnetic sensors product, Magnetic line sensor

Features

High accuracy, large testing air-gap.
Wide power voltage range 12-24Vdc, ideal for harsh environments
Compact and easy to install
The detecting air-gap is more than 40mm upon customer request

Technical Parameters

Model		MGS-H01	MGS-H16
Power Supply		DC l2.6V to 24V, ripple 1% max.	DC l2.0V to 30V, ripple 1% max.
Power Consumption		30mAmax
Operation Temperature		-10 to 60°C (storage: -20 to 70°C)
Operation Humidity		35% to 90%RH (avoid dew condensation)
Enclosure Rating		IP-65
Operation Air Gap*		35 to 40mm (with MGT-50 magnetic tape)
Target Magnet		MGT-50, MGT-50 -25-A, MGT-50-25-B
Insulation Resistance		100 MΩ
Deviation Out	Output Element	Operational amplifier	16 bit NPN open collector load current: less than 1 00mA
	Load Resistance	2KΩmin.
	Output Impedance	6.5Ω max. (Ta=23°C)
	Short Circuit Protection	Between output and GND
	Response Time	2.5ms
	Voltage Range	2V to 8V
	Center Voltage	5V
	Step Pitch	Straight mode; 0mm to 1 00mm±30
	Step Voltage	Straight mode; 0.167V, right or left branch mode; 0.333V
	Voltage Accuracy	±15mV
Gate Out	Area	±90mm from center of magnetic tape
	Operation Air Gap	40 to 35mm, for MGT-50
	Output Logic	Negative
	Circuit	Transistor open collector DC 24V max. sink current 100mA max
	Response	2.5ms

Dimension

Application

YUANBEN’s MGS series magnetic guide sensor is usually installed on the bottom of AGV and ensures the AGV follows a guide path of magnetic tape laid out on the floor. The MGS is a sensor prominently used in the logistics industry or production line batching section warehouses. Due to their high sensitivity, long detection range and excellent adaptability to harsh environments, YUANBEN’s self-developed magnetic guide sensors are ideal for installation of AGVs in unmanned warehouses.