Cleanroom Drying Oven in LCD Applications Manufacturer

Cleanroom Drying Oven in LCD Applications

Request a Quote

About Us: http://drying-ovens.com/8-3-lcd-hot-air-oven.html

This drying oven series is specially designed for production processes in the LED photoelectronic component industry. The temperature range, vacuum, working chamber size and compartment height are all designed to meet industry requirements.

Clean drying equipment for LCD production

Type：HY02A-140-16
Basket size：435*386*250
Working chamber size：height 1200mm, width 950mm, depth1200mm.
Insulation thickness：90mm.
Heating tube position：Top.
Blowing motor position: Top.
Air inlet location：left side.
Air outlet position: back, with exhaust motor.
Filter position: top;
Air transport: horizontal air supply.
Stratification inside：2 layers, with 2 stainless steel shelves.

Opening method：double door, Lever type door buckle, sealing strip is silicone rubber hollow.
Working temperature range: room temperature +15℃~300℃.
Instrument accuracy：±0.2℃.
Temperature fluctuation：≤±2℃.
Temperature uniformity：≤±5℃.
Heating time：≤60min（empty oven，60℃~250℃）.
Temperature control method：PID adjustment，SSR Module output control.
Temperature control segment：Digital intelligent temperature controller.

Timing range：1min~99h 99min，Timing to cut off the heat, open the exhaust and alarm.
Cleanliness：100level（≥0.5μm dust≤3.5 per liter）.
The highest tolerance temperature of the filter：350℃.
Outside surface temperature：≤room temperature+25℃.
Power supply：380V three phase.
Heating power：15KW.
Blast power：.750W*3.
Maximum current：30A.

Hot pressing drying equipment for LCD production

Type：STRY-160-16(16 shelves) .
Working chamber size：height 1150mm, width 1350mm, depth 1100mm.
Insulation thickness：90mm.
Heating tube position：Both sides.
Blowing motor position: Top.
Air inlet location：Both side.
Air outlet position: top, with 370W exhaust motor.
Air transport: horizontal air supply.
Stratification inside：4 layers
Opening method：double door, Lever type door buckle, sealing strip is silicone rubber hollow.
Control box position：right side.

Working temperature range: room temperature +15℃~250℃.
Instrument accuracy：±0.2℃.
Temperature fluctuation：≤±1℃.
Temperature uniformity: ≤±5℃；
Heating time：≤60min（empty oven，60℃~150℃）.
Temperature control method：PID adjustment，SSR Module output control.
Temperature control segment：Digital intelligent temperature controller of Yudian.

Timing range：1min~99h 99min，Timing to cut off the heat and alarm.
Outside surface temperature：≤room temperature+25℃.
Power supply：380V three phase.
Heating power：24KW.
Blast power：.750W*2.
Maximum current：40A.