Hydraulic Door Skin Press Machine

Hydraulic Door Skin Press Machine
Request a Quote
Introduction

The hydraulic door skin press machine has a main engine consisting of the engine body, main cylinder, ejection cylinder and filling valve. It also features a control system that consists of the power mechanism, limiting device, hydraulic remote control device and electric control box.

Parameters
Specifications and models Y78-3000T
Nominal force (kN) 30000
Return force (KN) 435
Slide stroke (mm) 500
Maximum working pressure of hydraulic system (MPa) 25
Slider travel speed Rapid down(mm/s) 100-120
Slow down(mm/s) 7-12
Return speed (mm/s) 100-120
Table size Length(mm) 2500
Width(mm) 1500
Total power(KW) 30KW+30KW=60KW
Plunger cylinder diameter(mm) ZSG500 X500 X 6
Column diameter(mm) 265mm X 4, 195mm X 4
Features
  • The hydraulic press is mainly consists of three sections, designed with 8 hydraulic columns.
  • The cylinder block is forged using GB/T699-1999 steel. The cylinder plunger is hard cold cast iron and the surface hardness is higher than HRC45.
  • Eight columns are made out of GB/T 699-2015 steel, quenched to HBS255-275. The surface hardness plated with hard chromium is more than HRC55. The guide sleeve is made of QT450-10 ductile iron.
  • The entire system uses a cartridge valve with a simple structure and reliable operation with no leaks, thus meeting the needs for high pressure and a large flow rate. The excellent heat dissipation performance reduce the reactive power loss.
Related products
Send Message
Inquiry
Inquiry