Abrasion Resistant Hose
The abrasion resistant hose is a kind of conveying hoses and is designed for conveying materials with large friction coefficient, which requires the hoses to have ultra-high abrasion resistance. The inner rubber of hose adopts abrasion-resistant NBR. But the abrasion resistant hose doesn't need to bear high pressure and 12BA can be considered as the high pressure.
- Outer rubber layer: SBR/NR mixed conductive rubber
- Inner rubber layer: NBR highly abrasion resistant rubber
- Reinforcement layer, high-strength woven cords. Duratech abrasion-resistant hoses adopt double layer woven cords.
According to the working conditions, the abrasion level of transporting particles caused to the hoses, the abrasion-resistant hoses can be divided into light-weight abrasion resistant hose, heavy-duty abrasion resistant hose and vacuum abrasion resistant hose.
Light-weight abrasion resistant hose
Widely used in applications like sand blasting. Inner rubber adopts abrasion resistant NBR and outer layer is covered by compound rubber.
Heavy-duty abrasion resistant hose
Ideal for sand, grit, grait and slurry blasting equipment.
Vacuum abrasion resistant hose
Embedded spiral steel wires. Vacuum negative pressure up to 0.9BA.
DN | Inches | I.D (mm) | O.D(mm) | Max.W.P | Min.B.P | Min.B.R | |
Min | Max | Min | (Mpa) | (Mpa) | (mm) | ||
16 | 5/8 | 15.8 | 16.6 | 29.0 | 1.0 | 4.0 | 105 |
19 | 3/4 | 18.8 | 19.8 | 35.0 | 1.0 | 4.0 | 130 |
25 | 1 | 24.8 | 25.8 | 44.0 | 1.0 | 4.0 | 150 |
32 | 1 1/4 | 31.6 | 32.6 | 50.0 | 1.0 | 4.0 | 190 |
38 | 1 1/2 | 37.7 | 38.8 | 59.0 | 1.0 | 4.0 | 240 |
45 | 1 3/4 | 44.6 | 45.6 | 64.0 | 1.0 | 4.0 | 260 |
51 | 2 | 50.7 | 52.0 | 71.0 | 1.0 | 4.0 | 300 |
64 | 2 1/2 | 63.7 | 65.3 | 85.0 | 0.8 | 3.2 | 800 |
76 | 3 | 75.5 | 77.3 | 102.0 | 0.8 | 3.2 | 920 |
89 | 3 1/2 | 88.5 | 90.5 | 115.0 | 0.8 | 3.2 | 1100 |
102 | 4 | 101.5 | 104.0 | 128.0 | 0.8 | 3.2 | 1300 |