Electrical Power Feedthrough

Electrical Power Feedthrough
Electrical Power Feedthrough
Electrical Power Feedthrough
Request a Quote

Application:
This electrical power feedthrough feedthrough mainly used in high power equipment that requires hermeticity, electrical insulation and high pressure withstanding while establishing electrical connections.

Materials:
Body: C45#
Pin:C45#
Glass: Elan 48#

Sintering process
  • 1. Goods receiving
  • 2. Incoming inspection
  • 3. Steel needle etching
  • 4. Oil removing on metal cap
  • 5. Assembly and sintering
  • 6. Air permeability inspection
  • 7. Chemical nickel plating
  • 8. Welding
  • 9. Silicon process
  • 10. Electrical property inspection
  • 11. Appearance inspection
  • 12. QA inspection
  • 13. Packaging
  • 14. Shipping
Features
  • Good insulator: Static test at 500VDC, insulation greater than 10000Ω
  • Airtightness: Remain air tight at 2.5MPa
  • High voltage withstanding: greater than 5000VAC, current leakage less than 0.5Ma
  • Corrosive resistant: With reference to salt spray standard GB/T2423.17, reaching level 8 and above
  • Resistant to various refrigerant: R114a, R410a, R22 and CO2
  • Resistant to cold and thermal shock: remain functioning from -40 degree Celsius to 300 degree Celsius.

Surface treatment:
We adopt the environmental friendly electroplating technique, which is electroless nickel plating at 3-5 μm thickness. The nickel coat does not contain hazardous substances such as mercury, lead, cadmium and hexavalent chromium, reaching EU's standards. It passed the SGS environmental test.

  • Corrosive resistant ability: After a 12 hours 5% salt spray test, the rusty area must not exceed 5% of the total area according to the ISO9227-2017 test standard.
  • Salt spray test standard: GB/T2423.17,IEC60068-2-11,ISO4628-3

Index
glass to metal seal, hermetic seals

Send Message
Inquiry
Inquiry