Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)

Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Tunnel Fluid Bed Coating Drying Oven (Infrared Heating)
Request a Quote

Brief introduction
The tunnel fluid bed coating drying oven (infrared heating) is used to even out the coating on the surface of roll coated, spray coated, or curtain coated panels. This is designed to prevent the appearance of any unevenness such as sagging or brush marks on the panel surface.

It can be directly connected to coating equipment. During operation, after the surface coating application parameters have been set, the products will enter the constant temperature tunnel (whose temperature can also be adjusted) in order to smooth the surface coatings. In doing so, the diluent and bubbles in the coatings will become volatile, thus ensuring the smooth product surface.

  • Sagging
  • Brush marks

Depending on customer requirements, we can also add a high temperature drying section to be installed behind the leveling section in order to ensure all products are thoroughly dried. If a UV paint is used, the products can be placed directly into the UV coating dryer after the coating smoothing process.

Application site

  • For the production of wood furniture
  • For the production of building decorative materials
  • For the drying of water-based paints

Main parameters

Effective processing thickness 2-80mm
Effective processing width 620/920/1320mm(optional)
Minimum processing length 300mm
Transport speed 0-20m/min
Lamp quantity 18
Power supply 380V/50Hz

Features

  • The tunnel temperature can be set and adjusted depending on project needs, making it suitable for the temperature process requirements for a variety of coating types.
  • The transfer speed is controlled using an adaptable frequency conversion. The frequency conversion adapts to the leveling process conditions of different coating types.

Optional models

The SR-IH series tunnel fluid bed coating drying oven (infrared heating, high temperature)
After levelling off the coated panels, this machine will dry and solidify them with the use of an infrared heating device. If a customer is using baking varnish for the coating application, this equipment is an ideal solution, as it simultaneously carries out a high quality, two step leveling and drying process, thus enhancing customer productivity.

Model Effective processing width (mm) Lamp power (kw) Transport power (kw) Outline size (mm)
SR-IH620 620 0.6*18 0.75 6000L×950W×1500H
SR-IH920 920 1.0*18 0.75 6000L×1250W×1500H
SR-IH1320 1320 1.2*18 1.5 6000L×1550W×1500H

SR-IR series tunnel fluid bed coating drying oven (infrared heating, low temperature)
It is specifically designed for panels coated with UV paints, and will level off the coated panels in order to give them a flat, smooth surface. After levelling, users need to use a UV curing machine in order to carry out further UV coating curing processes. : for more information about the UV curing equipment.

Model Effective processing width (mm) Lamp power (kw) Transfer power (kw) Outline size (mm)
SR-IL620 620 0.6*18 0.75 6000L×950W×1500H
SR-IL920 920 1.0*18 0.75 6000L×1250W×1500H
SR-IL1320 1320 1.2*18 1.5 6000L×1550W×1500H
Related products
Send Message
Inquiry
Inquiry