Upgrade Version SMD Hot Tweezer Soldering Station, Item WEP-938BD
Request a Quote
Our WEP-938BD upgraded version features a convenient design combined with soldering tweezers and a soldering iron. The equipment is widely used for soldering and de-soldering electronic components, chips, surface-mount devices, etc. In addition to satisfying regular welding requirements, this soldering station is widely used for soldering large terminals, welding joints, and other difficult soldering jobs.
ParametersTemperature Range | 100°C~480°C/212°F~896°F |
Display | LCD |
Temperature Stability | ±2°C(Static) |
Heating Coil Voltage | AC 24V ±10% 50Hz |
Tip to Ground Impedance | <2Ω |
Tip of Ground Voltage | <2mV |
Dimension | L150xW136xH93mm ±5mm |
Wire Length | ≥120cm |
Working Temperature | 0~40°C/32°F~104°F |
Storage Temperature | -20°C~80°C/-4°F~176°F |
Storage humidity | 35%~45% |
- Programming temperature control technology with built-in PID controller for the real-time tracking of the temperatures of each soldering iron, and correct temperature with quick speed and minimal tolerance.
- Backlity LCD display with delicate design and shows accurate temperature of soldering tweezers and soldering iron, as well as other functions.
- Personalized Functions:
A.3-segment Parameter Storage Function:
Memory functions at different parameters and quick retrieval for future uses in three different appropriate temperate range of CH1/CH2/CH3.
B. Sleep Mode:
The soldering rework station has a status self-detection function, if the equipment is in static motion for a set time, the system will go to sleep and the temperature of soldering iron will decrease to 100℃. This function can effectively prevent the soldering iron from oxidizing, which serves as a safety precaution and extends the working life of the equipment.
C. Temperature Correction Function:
The rework station can automatically correct the temperature due to environmental changes or the replacement of the heating coil, solder iron or other components with a temperature correction range of -50℃ ~ 50℃. - The touch interface adopts intelligent virtual buttons with excellent sensitivity, fast response, stable performance and delicate appearance.
Standard Configuration
Machine: 1pc
Soldering iron handle (including tip and heater): 2pcs
Titanium alloy holder: 1pc
Rosin flux: 1 box
Instruction book: 1pc
If you need quick after-sales support
Please don't hesitate to send an email to !
Related products
Send Message
Most Recent
More
Other Products
Videos