KOSMEK HB Die Clamps
Request a Quote
The KOSMEK HB die clamps are a compact clamp with a force amplifier inside. The mold can be moved on the T-slot through manual operation, and will have a large clamping force using only air pressure, thus maintaining the clamping force and retention force, even when there is no air supply.
Technical parameterOptional type
Type | HB0101 | HB0161 | HB0251 | HB0401 | HB0631 | HB1001 | HB1601 | ||
Die clamp capacity | (kN) | 9.8 | 15.7 | 24.5 | 39.2 | 61.7 | 98 | 157 | |
Retention | Pressure | 0. 39MPa | 9.8 | 15.7 | 24.5 | 39.2 | 61.7 | 98 | 157 |
(kN) | Pressure | OMPa | 2.9 | 5.9 | 8.8 | 13.7 | 20.6 | 30.8 | 50.3 |
Clamping force (kN) | Pressure | 0. 49MPa | 7.8 | 13.7 | 20.6 | 32.3 | 50 | 77.4 | 127 |
Pressure | 0.39MPa | 6.9 | 11.8 | 17.6 | 27.4 | 43.1 | 66 | 108 | |
Pressure | OMPa | 2 | 3.9 | 4.9 | 7.8 | 11.8 | 17.7 | 28.9 | |
Max stroke | | (mm) | 3 | 3 | 32 | 3.6 | 4 | 4.5 | 5 |
Clamping stroke | | (mm) | 1 | 1 | 1 | 1.1 | 1.2 | 1.2 | 1.2 |
Reserved stroke | 2 | 2 | 2.2 | 2.5 | 2.8 | 33 | 3.8 | ||
cylinder volume | Clamping side | 56 | 94 | 144 | 259 | 444 | 773 | 1334 | |
(cm3) | Releasing side | 52 | 88 | 135 | 244 | 416 | 729 | 1262 | |
Supply pressure | Recommended pressure | 0.49 | |||||||
(MPa) | Min pressure | 0.39 | |||||||
Operating temperature | Below 70°C(over 70°C, please contact us) | ||||||||
Operating frequency | Below 20 times/ day (or you need contact us) | ||||||||
- The power source is normal compressed air, so users do not need to worry about oil leakage that will dirty up the clamping machine and surrounding environment. This also means there is no need to worry about operating oil stocks or fire hazards.
- All circuits use air pressure piping, thus making piping operations more convenient.
- There is no oil leakage during pipe disassembly, which makes equipment maintenance easier.
- Compared to the KOSMEK GWA die clamps, it has the same installation distance between holes, giving the two series an excellent compatibility.
- Compared to mold changes by oil pressure, this HB die clamp features a lower operating pressure, ensuring a higher durability under high temperatures.
- The price of the HB die clamps is lower than oil pressure die clamps during long term usage.
Type | ∫ |
HB0101 | 108 |
HB0161 | 113 |
HB0251 | 122.5 |
HB0401 | 127.5 |
HB0631 | 124.5 |
HB1001 | 133.5 |
HB1601 | 167 |
① Air supply for clamping
② Air supply for releasing
③ Guide sleeve
④ Hanger bolt hole
⑤ Clamping point
⑥ Reserved stroke
⑦ Max stroke
⑧ Clamping stroke
Dimensions
Type | E | F | G | J | KA | KB | L | M (h) | N | P | UA | VA | VB | X | Y | Z | MIN.a | MIN.c | MIN.h | MAx.h |
HB0101 | 69 | 50 | 16 | 14 | 65 | - | 148.5 | 27 (36) -47 (15) | 2.5 | 7 | 27.5 | 60 | 10.5 | - | Rc1/8 | - | 10 | 6.5 | 15±0.3 | 35±0.3 |
HB0161 | 77 | 60 | 19 | 16 | 74 | - | 162 | 30 (40) -55 (15) | 2.5 | 7.5 | 26.5 | 64 | 11 | - | Rc1/8 | - | 12 | 8 | 15±0.3 | 40±0.3 |
HB0251 | 87.5 | 72 | 25 | 17 | 87 | - | 181.5 | 40.5 (40) -60.5 (20) | 2.5 | 8.7 | 30.5 | 70 | 11 | - | Rc1/8 | - | 14 | 9.5 | 20±0.3 | 40±0.3 |
HB0401 | 106.5 | 90 | 30 | 20 | 101.5 | - | 201 | 53.5 (45) -78.5 (20) | 2.5 | 10 | 36 | 74.5 | 11.5 | - | Rc1/8 | - | 18 | 12 | 20±0.3 | 45±0.3 |
HB0631 | 131 | 110 | 36 | 22 | 121.5 | - | 236 | 65 (20) -85 (30) | 2.5 | 11 | 51 | 89 | 11.5 | M8 | Rc1/8 | - | 22 | 14 | 30±0.3 | 50±0.3 |
HB1001 | 154 | 135 | 48 | 26 | 143 | 60 | 266.5 | 84 (60) -109 (35) | 3.5 | 13 | 112.5 | 106.5 | 8.5 | M8 | Rc1/8 | - | 24 | 16.5 | 35±0.3 | 60±0.3 |
HB1601 | 186 | 160 | 55 | 30 | 179.5 | 75 | 331.5 | 106 (70) -136 (40) | 3.5 | 17 | 134 | 128 | 12 | M10 | Rc1/4 | 6 | 28 | 20 | 40±0.3 | 70±0.3 |
Related products
Send Message
Most Recent
More
Other Products
Videos