Bus Wash Equipment with Rollover 3 Brushes

Bus Wash Equipment with Rollover 3 Brushes
Bus Wash Equipment with Rollover 3 Brushes
Bus Wash Equipment with Rollover 3 Brushes
Request a Quote

Bus wash equipment with 3 roll over brushes (CB-730) has two lateral brushes and one overhead brush. It is most often used for washing buses and trucks where the length does not exceed 18000mm, the height does not exceed 4200mm, and the width is 2700mm. During the washing process, the bus remains motionless, and the bus wash machine will move the brushes around the vehicle. Shown below is some basic information.

Parameters
Model CB-730
Dimension L*W*H: 2880mm×5120mm×5900mm
Assembling Range L≤24000mm×W 6800mm (necessary inspection channels are designed on two sides)
Moving Range L 1800-2400mm × W 6800mm
Voltage AC three-phase four-wire system voltage AC380V50Hz
Water Supply DN25mm water flow rate≥120L/min
Ground Flatness Deviation≤10mm
Washing method 1 rollover
Applicable Vehicles Container truck, box truck, bus
Applicable Car Dimension L≤18000mm×W 2700mm×H≤4200mm
Washing Time 12-15 cars/h
Advantages
  • Rollover washing ensures a better cleaning performance.
  • A fully automatic PLC electronic control system improves the security.
  • The high-pressure water spray system increases the washing speed.
  • The galvanized frame is extremely corrosion resistant.
Configurations
Standard Devices
Lateral brush motor
Overhead brush motor
Water pump
Drive motor
Equipment data intellectualization
Self-diagnose system
Related products
Send Message
Inquiry
Inquiry