Reinforced Hollow Fiber MBR Membrane
Request a Quote
Request a quote
Features
- Enhanced Antifouling Property
The new generation of MLD antifouling PVDF hollow fiber membrane has been thoroughly improved in the aspect of antifouling property by adopting completely new techniques from membrane manufacturing to microstructure changing, thereby leading to declined membrane fouling while significantly increasing flux. - High Mechanical Strength, No Fiber Breakage
Constructed with reinforced structure, the membrane fiber has increased elongation at break of over 200N, efficiently preventing membrane fiber from breaking. - High Quality Effluent
The average pore size is approximately 0.1μm and the preferable distribution allows for efficient removal of suspended solids, bacteria, colloids, viruses and other contaminants, thus providing high quality effluent. - Higher Membrane Hydrophilicity, Easy To Clean
Based on exclusive hydrophilic modification technique, the membrane group is featured by permanent hydrophilicity, which greatly increases antifouling, reduces cleaning cycles and prolongs the service life of membranes.
Parameters
| MBR Membrane Model | MLDD-1010 | MLDD-1520 |
| Membrane size (L*W*H) | 571*45*1100mm | 571*45*1510mm |
| Water collecting pipe end | OD32 UPVC | OD32 UPVC |
| Weight of membrane group (wet) | 8kg | 12kg |
| Effective membrane area | 10m2 | 20m2 |
| Membrane material | Reinforced PVDF hollow fiber | |
| Filtration method | External pressure, pump suction filtration | |
| Water collecting pipe material | ABS | |
| Adhesive | Epoxy resin, polyurethane | |
| Pore size | < 0.1μm | |
| Fiber ID/OD | 1.0/2.1mm | |
| Effluent turbidity | < 5 NTU | |
| Effluent suspended solids | < 1mg/L | |
| Lifetime | 5 years | |
| Operational Parameters | ||
| Design flux | 150-250 L/Hr | 300-500L/Hr |
| Aeration air flow rate | 2-4Nm³/h per membrane group | |
| Filtration | Negative pressure filtration | |
| Sludge concentration | < 15000mg/L | |
| Working temperature | 5-45℃ | |
| pH value | 210 | |
| Water production cycle | Water production: 9-12 minutes Relaxation: 2 minutes | |
| Membrane cleaning agent | Sodium hypochlorite, hydrochloric acid, citric acid | |
| Chemical cleaning cycle | 6-12 months | |
| Chemical cleaning agent | Hydrochloric acid, sodium hydroxide | |
| Notes: all the parameters in this table are only for user's reference for the applications of wastewater treatment. We are able to custom manufacture membranes with specific parameters according to customer's requirements for flexible usage. | ||
Related products
Send Message
