KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries

KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
KG430/KG430H DTH Drill Rig Designed for Open Pit Mines and Quarries
Request a Quote

The KG430/KG430H down the hole (DTH) drill rig is engineered for high efficiency open pit mining and stone quarrying use. The track drill features tramming and drilling controls easily accessed over the left hand track. Equipped with a Yuchai four-cylinder engine (China III), the drill rig meets all relevant national standards for emissions and environment. A folding frame track and four-wheel drive are combined with a plunger piston tramming motor to improve working pressure and climbing capacity. The KG430H down the hole drill rig for open use is equipped with a dust collector, making the equipment more environmentally-friendly and reliable.

Brief Parameters
Drilling diameter: Φ90-127mm
Depth of economical drilling: 25m
Method of Feed: Oil cylinder-leaf chain
Feed stroke: 3175mm
Supporting power: YCD4R23T8-80 (59KW/2400r/min)/Yuchai YCD4R23T8-80 (59KW/2400r/min)

Technical Parameters
Model of drill rig KG430 KG430H
Weight of complete machine 5500KG 5700KG
Outer dimensions 5700×2150×2700mm 5700×2150×2700mm
Drilling hardness f=6-20
Drilling diameter Φ90-127mm
Depth of economical drilling 25m
Rotary speed 0-90rpm
Rotary torque 3000N·m
Lifting force 40KN
Method of Feed Oil cylinder-leaf chain
Feed stroke 3175mm
Travelling speed 0-2.5km/h
Climbing capacity ≤30°
Ground clearance 500mm
Tilt angle of Beam Down: 135°, up: 50°, total: 185°
Swing angle of boom Left: 91°, right: 5°, total: 96°
Pitch angle of drill boom Down: 55°, up: 15°, total: 70°
Swing angle of drill boom Left: 45°, right: 45°, total: 90°
Leveling angle of track ±10°
Compensation length of beam 900mm
Supporting power YCD4R23T8-80 (59KW/2400r/min)/Yuchai YCD4R23T8-80 (59KW/2400r/min)
DTH hammer K4
Drilling rod Φ76×3m
Air consumption 18-21m3/min
Maximum height of horizontal hole 2900mm
/Minimum height of horizontal hole 750mm
Detail features
  • Easy Used Control Panel
  • High torque gyrator
  • Stable hydraulic system
  • Steel track adaptable to all terrains
  • 1Air Compressors
Related products
Send Message
Inquiry
Inquiry