DN Multi Spot Welder
Request a Quote
The DN multi spot welder with high secondary volts is engineered for high precision through digital control. With optimized welding results, it can be widely used for electro-soldering, heat tempering, and annealing.
Features
- Digital setting and display of all operating parameters like weld voltage, power setting, etc.
- In-memory data storage to prevent accidental data loss.
- Voltage fluctuations are monitored to prevent damage to data.
- Adjustable stroke air cylinder and speed control valves to control ram movement up and down.
- Resistance welding transformer delivers a strong electrical current. The water-cooled welding transformer can deliver power at high efficiency to reduce the energy loss using silicon steel cores.
- 40 sets of welding parameters are under microprocessor precision control.
- Error management is adopted for general warnings and major faults through the appearance of error messages.
Parameter
Item | Unit | DN-25 | DN-40 | DN-63 | DN-80 | DN-100 | DN-150 | DN-200 |
Rated voltage | V | 380 | 380 | 380 | 380 | 380 | 380 | 380 |
Rated frequency | HZ | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 | 50/60 |
Rated capacity | KVA | 25 | 40 | 63 | 80 | 100 | 150 | 200 |
Rated duty cycle | % | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
Insulation class | B | B | B | B | B | B | B | |
Maximum secondary short circuit current | A | 13500 | 19500 | 25000 | 30000 | 35000 | 41000 | 46000 |
Maximum welding power | KVA | 35 | 56 | 89 | 113 | 141 | 212 | 282 |
Maximum pressure | N | 3900 | 6100 | 6100 | 10000 | 10000 | 15600 | 15600 |
Stroke | mm | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
Input air pressure | Mpa | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Cooling water flow | L/min | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
Arm extension length | mm | 320 | 320 | 320 | 320 | 320 | 320 | 320 |
Related products
Send Message
Most Recent
More
Other Products
Videos