Automatic Flatbed Die Cutter, MZ 1050/1050Q for Paperboard and Single Flute Corrugated Board
The top feeder, automatic flatbed die cutting machines are known specifically for their die cutting, stripping and creasing of high end colored card boxes. Equipped with the latest Siemens PLC technology, a top feeder system and a high running speed, the machine is highly efficient.
- Paper
- Carton board
- Semi-rigid plastics
- Corrugated board
- Laminated board
- Solid board
| Model NO. | |
| Maxi sheet size | 1050*750mm |
| Min sheet size | 450*360mm |
| Maxi cutting size | 1040*730mm |
| Maxi cutting pressure | 300 Tons |
| Stock range | Corrugated board up to4mm, cardboard (90-2000g) |
| Cutting precision | ±0.1mm |
| Pressure adjustment range | ±1mm |
| Paper delivery height | 1250mm |
| Paper feeding height | 1500mm |
| Maxi speed | 7500 s/h |
| Min front waste | 9mm |
| Inner chase | 1140*756mm |
| Machine power | 20 KW |
| Motor power | 11 KW |
| Dimension | 5050*4400*2440mm |
| Weight | 15.5 Tons |
| Machine Model | |
| Maximum sheet size | 1050 x 750mm |
| Minimum sheet size | 400 x 360mm |
| Maximum cutting size | 1040 x 730mm |
| Maximum cutting pressure | 3 MN (300 tons) |
| Stock range | Corrugated board up to 4mm and cardboard (100-2000g) |
| Cutting precision | ±0.1mm |
| Pressure adjustment range | ±1mm |
| Paper delivery height | 1400mm |
| Paper feeding height | 1500mm |
| Maximum mechanical speed | 7,500sph |
| Minimum front waste | 9mm |
| Inner chase size | 1140x756mm |
| Machine power consumption | 21 kW |
| Power require | 380V, 3-PH, 50hz |
| Dimension (L*W*H) | 6000 x 4400 x 2440mm |
| Net Weight | 17 T |
| Machine Model | |
| Maximum sheet size | 1060 x 760mm |
| Minimum sheet size | 400 x 360mm |
| Maximum cutting size | 1050 x 750mm |
| Maximum cutting pressure | 3 MN (300 tons) |
| Stock range | Corrugated board up to 4mm and cardboard (100-2000g) |
| Cutting precision | ±0.1mm |
| Pressure adjustment range | ±1mm |
| Paper delivery height | 1400mm |
| Paper feeding height | 1500mm |
| Maximum mechanical speed | 7,500sph |
| Minimum front waste | 9mm |
| Inner chase size | 1140x756mm |
| Machine power consumption | 21 KW |
| Power require | 380V, 3-PH, 50hz |
| Dimension (L*W*H) | 6200 x 4500 x 2440mm |
| Net Weight | 17.5 T |
- This corrugated board machine is built for quick set-up, safety, wide stock range and reducing damages to print sheets.
- Able to handle solid board (90-2000gsm) and corrugated board of single flute up to 4mm.
- The feeder will offer stream feeding for solid board while singe sheet feeding for corrugated sheets.
- Feeding table with pull and push convertible side lay for accuracy.
- Belt driven and cast-iron build machine body for smooth and stable machine performance.
- Center line system equipped to be compatible with cutting forms used in flatbed die cutters of other brands. And to offer quick machine setup and job changes.
- Full stripping function (triple action stripping system and lead edge waste removal device) to savor labor cost and shorten delivery time to your customers.
- High pile delivery system.
- Sheet blowing system and brush system at delivery section especially for solid board perfect collecting.
- Many safety devices and photo-sensors are equipped to protect operators from injury and to also protect machine from incorrect operation.
- All the parts selected and assembled are built for stable performance and long run.
- Format: 1060x760mm / 1050x750mm
- Maximum mechanic speed: 7,500 s/h
1.Feeding Section
Century Machinery’s customized feeder system is installed on the machine.
Four pick up and four forward suction heads carry out angle adjustment.
Less scratches on the paper to ensure the quality of finished boxes.
This feeding station is applicable to cardboard 100-2,000gsm, and E, F, C, B and flute.
2.Feeding Table
The feeding table has side guards on both the left and right hand sides to push and pull in conversion operations.
A photoelectric detector and side guard device are on the machine for high speed feeding and precise registration.
3. Die Cutting Section
A pneumatic lock up system and centerline system are used for a fast cutting die set up and job changeover.
Using internationally known brand for the bearings, Electrical Control System and electronic components, precise control over the die cutting process is achieved.
4.Stripping Section
An electrically controlled lifting device on the stripping frame is Equipped.
A centerline system is used for a fast stripping die set up.
Triple stripping system for different stripping jobs.
Front waste separator to achieve full stripping and front waste transferred to the machine drive side by conveyor belt.
5.Delivery Section
Equipped with secondary delivery system for non-stop delivery.
A photoelectric device ensures safe operation and entrance into the delivery section.
A bottom and flat blowing system ensures a smooth and accurate delivery.
6. Electrical Control System
Siemen’s PLC technology guarantees a trouble free die cutter operation.
The electrical control section uses electrical components from international brands for a better performance and fast, local after-sales service and maintenance.
AS the automatic die cutter is equipped with a number of different safety protection devices, the machine will alarm and stop automatically when problems occur. This guarantees the safety of the operator and the machine.
