Sand and Dust Environmental Test Chamber
Request a Quote
Sand and dust blown using the chamber's blower goes through product sample surfaces in order to test the product resistance to dusty, desert like environments.
Parameter:Dimensions | |
Nominal volume | 1m³ |
Interior | W1000×D1000×H1000 mm |
Exterior | W1450×H1900×D1100 mm |
Capability | |
Environment | Temperature:+25℃ Relative humidity:≤85% Atmospheric pressure:86~106kpa |
Temperature range | Normal |
Humidity range | < 65%R.H |
Dust concentration | 2~4kg/m3 |
Wind speed | 2-10M/S |
Blowing time | 1s~99h adjustment |
Vibration time | 1s~99h adjustment |
Dust | Dry talc power through a square sieve whose sieve hole diameter is 75µm and wire diameter is 50µm Dust concentration:2-4Kg/m3 |
Noise | ≤75dB(A) |
- Internal structure
- Internal chamber
- Dust inlet
- Pressure gauge
- The high quality silicone rubber seal strip features an excellent tightness, as well as an outstanding aging and high temperature resistance, thus preventing any leaks.
- Dust will fall and gather at the tapered bottom of the internal chamber equipped with a vibrator. Operators can then remove dust and sand from the dust outlet.
- Customers can install remote control software on a computer in order to allow the operator to remotely control the equipment.
Related products
Send Message
Most Recent
More
Other Products
Videos