PCBN Wiper Insert

PCBN Wiper Insert
PCBN Wiper Insert
PCBN Wiper Insert
PCBN Wiper Insert
PCBN Wiper Insert
PCBN Wiper Insert
PCBN Wiper Insert
Request a Quote

Description of PCBN Material:
Cubic boron nitride is the second hardest material in the world invented successfully in 1957. The hardness of CBN’s single crystal is HV8000-9000 while the hardness of PCBN is HV2500-5000, so its abrasive resistance is considerably better than tungsten carbide and ceramics. With high temperature oxidation resistance at 1000℃, CBN will do not have any chemical reaction together with ferrous material at 1200-1300℃. So CBN material is ideal for cutting ferrous materials, the CBN cutting tools are used for cutting hardened steel, cast iron, sintered iron as well as powder metallurgy components.

Features of PCBN Wiper Insert:
1. Uniquely designed wiping angle
2. The PCBN insert can improve the surface smoothness of processing material, and meet high surface roughness requirements
3. Highly welding strength
4. Bigger feed rate, higher cost performance
5. This tipped tool can improve the processing efficiency, and reduce the cost.

Worldia Wiper PCBN Insert:
1. Premium CBN materials, mini tip, less cost and better performance
2. Clear mark of PCBN material makes it easily to recognize
3. Clear numbers of tips make the insert easily to management
4. Special welding technology, firmly welded
5. Wiper tip inserts can improve the surface finishing of workpiece, increase machining efficiency, mini tip inserts can reduce the cost of cutting tools. The max. AP=0.5mm
6. Clear serial number on carbide substrate makes it easily to track the PCBN insert quality and the feedback information.

Technical Specifications:
Standard cutting edge Sharp Cutting Edge Strong Cutting Edge
S0102505 S0051502 S0103505
Shape ISO ANSI Cutting Edge Tip Shape Grade Dimensions in mm
PN311 PN310 PN312 ic φd s r la
CCGW09T304-2N CCGW3(2.5)1-2N S0102505 SLWG22S 9.525 4.4 3.97 0.4 2.2
S0051502  
S0103505  
CCGW09T308-2N CCGW3(2.5)2-2N S0102505 0.8
S0051502  
S0103505
DCGW070204-2N DCGW2(1.5)1-2N S0102505 SLWG22S 6.350 2.8 2.38 0.4 2.2
S0051502  
S0103505  
DCGW070208-2N DCGW2(1.5)2-2N S0102505 0.8
S0051502  
S0103505
DCGW11T304-2N DCGW3(2.5)1-2N S0102505 SLWG22S 9.525 4.4 3.97 0.4 2.2
S0051502  
S0103505  
DCGW11T308-2N DCGW3(2.5)2-2N S0102505 0.8
S0051502  
S0103505
CNGA120404-2N CNGA431-2N S0102505 SLWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
CNGA120408-2N CNGA432-2N S0102505 0.8
S0051502  
S0103505
CNGA120404-4N CNGA431-4N S0102505 SWWWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
CNGA120408-4N CNGA432-4N S0102505 0.8
S0051502  
S0103505
DNGA150404-2N DNGA431-2N S0102505 SLWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
DNGA150408-2N DNGA432-2N S0102505 0.8
S0051502  
S0103505
DNGA150404-4N DNGA431-4N S0102505 SWWWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
DNGA150408-4N DNGA432-4N S0102505 0.8
S0051502  
S0103505
DNGA150604-2N DNGA441-2N S0102505 SLWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
DNGA150608-4N DNGA442-4N S0102505 8
S0051502  
S0103505
TNGA160404-3N TNGA331-3N S0102505 SLWG22S 9.525 3.81 4.76 0.4 2.2
S0051502  
S0103505  
TNGA160408-3N TNGA332-3N S0102505 0.8
S0051502  
S0103505
TNGA160404-6N TNGA431-6N S0102505 SWWWG22S 9.525 3.81 4.76 0.4 2.2
S0051502  
S0103505  
TNGA160408-6N TNGA432-6N S0102505 0.8
S0051502  
S0103505
WNGA080404-3N WNGA431-3N S0102505 SLWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
WNGA080408-3N WNGA432-3N S0102505 0.8
S0051502  
S0103505
WNGA080404-6N WNGA431-6N S0102505 SWWWG22S 12.70 5.16 4.76 0.4 2.2
S0051502  
S0103505  
WNGA080408-6N WNGA432-6N S0102505 0.8
S0051502  
S0103505
Tip shape
SF SL SS CB CS SWW SWU
Full Face Solid Tipped Corner Solid CBN Standard Tipped Corners Standard Full Edge Solid Tipped Corners
Type ‘W’
Solid Tipped Corners
Type ‘U’
Cutting Edge Design
ST WG CB
Nose Radius Wiper Chip Breaker
   
Hard Steel Machining - Special PCBN Introduction.
Code Ap 22 25 28 30 40
Size Ap 2.2 2.5 2.8 3 4
Hard Steel Machining - Special PCBN Introduction.        Standard tipped comers      Solid tipped comers
Work piece
Material
type WORLDIA
PCBN Grades
Content PCBN Grade Bond Hardness Characteristics Applications
H Solid tipped
corners
PN311 45~50 1 TiC 2600~2800 Good thermal stability and crater wear resistance Used for high-speed continuous
turning of hardened steel
PN310 60~65 1~2 TiCN 2600~2800 Combination of wear
resistance and thermal
stability
Used for moderately interrupted
and continuous turning of
hardened steel
PN312 65~70 1< TiN 2700~2900 High degree of toughness due
to fine CBN and ceramic
binder matrix
Used for heavy interrupted
turning of hardened steel

Material:
The tool bit uses premium PCBN blanks manufactured by world famous companies.
The body part uses high quality tungsten carbide.

Application:
Worldia PCBN wiper inserts are used for machining for gears, drive components and bearing components for individual series or mass production, especially for cast iron, hardened materials.

Packaging:
Our PCBN insert can be packed with standard WORLDIA packaging, and also various non-standard packaging as per request.

Quality Control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

OEM/ODM Service:
We can customize the cutting tool and laser markings according to your requirements. Our business partners are all over the world including some cutting tool industry giants.

Contact:
We are ready to work together with friends from different walks of life to promote the development of super hard materials and tools industry, and also global agents are welcomed.

As a specialized PCBN insert manufacturer and supplier in China, Worldia also provides a wide range of products including diamond engraving tool, PCD saw blade, PCD diamond scribing wheel, and much more.

Related products
Send Message
Inquiry
Inquiry