Press Brake, WC67K Series Manufacturer

Press Brake, WC67K Series

Request a Quote

About Us: http://equip-metalworking.com/1-2-press-brake.html

Features

This press brake’s working cycle is divided into a fast approach, forming, and fast return phases, all enabled by the use of a second oil cylinder. The pressurized fluid will either extend or retract the cylinder to maintain the balance.
The 3-cylinder structure improves the press brake’s bending precision.
This press brake supports hydraulic synchronous control and an CNC programmable logic controller to ensure uniform operation and precise bending effects. An accurate positioning is supported through an enabled X and Y axis through an NC CNC system programming control to calculate the bending angle.

Technical Parameters

Model	Nominal force (KN)	Table Length (mm)	Distance between frames (mm)	Throat depth (mm)	Ram stroke (mm/min"1)	Max. open height (mm )	Motor	Dimensions LxWxH (mm )
							Power
							(KW)
40T/2200	400	2200	1600	260	100	320	4	2200x1200x1910
40T/2500	400	2500	1900	260	100	320	4	2500x1200x1910
50T/2500	500	2500	1900	260	100	330	5.5	2500x1260x2000
63T/2500	630	2500	1900	280	120	330	5.5	2500x1300x2210
63T/3200	630	3200	2600	280	120	330	5.5	3200x1300x2210
80T/3200	800	3200	2600	300	120	360	7.5	3200x1400x2300
80T/4000	800	4000	3100	300	120	360	7.5	4000x1400x2300
100T/2500	1000	2500	1900	320	120	380	7.5	2500x1500x2400
100T/3200	1000	3200	2600	320	120	380	7.5	3200x1500x2400
100T/4000	1000	4000	3100	320	120	380	7.5	4000x1500x2400
125T/3200	1250	3200	2600	320	120	380	7.5	3200x1550x2500
125T/4000	1250	4000	3100	320	120	380	7.5	4000x1550x2500
160T/3200	1600	3200	2550	340	200	460	11	3200x1650x2700
160T/4000	1600	4000	3050	340	200	460	11	4000x1650x2700
160T/5000	1600	5000	3950	340	200	460	11	5000x1750x3100
160T/6000	1600	6000	4950	340	200	460	11	6000x1800x3200
200T/3200	2000	3200	2600	360	200	460	15	3200x1950x2800
200T/4000	2000	4000	3100	360	200	460	15	4000x1950x2800
200T/5000	2000	5000	4000	360	200	460	15	5000x1950x3000
200T/6000	2000	6000	5000	360	200	460	15	6000x2000x3200
250T/3200	2500	3200	2600	400	250	460	18.5	3200x2000x3200
250T/4000	2500	4000	3100	400	250	460	18.5	4000x2000x3400
250T/5000	2500	5000	4000	400	250	460	18.5	5000x2000x3400
250T/6000	2500	6000	5000	400	250	460	18.5	6000x2000x3400
300T/3200	3000	3200	2600	400	250	520	22	3200 x 2000 x 3400
300T/4000	3000	4000	3100	400	250	520	22	4000x2000x3450
300T/5000	3000	5000	4000	400	250	520	22	5000x2000x3450
300T/6000	3000	6000	5000	400	250	520	22	6000x2000x3450
350T/4000	3500	4000	3100	400	250	520	22	4000x2080x3450
350T/5000	3500	5000	4000	400	250	520	22	5000x2080x3450
350T/6000	3500	6000	5000	400	250	520	22	6000x2080x3450
400T/4000	4000	4000	3100	400	300	560	30	4000x2180x3500
400T/5000	4000	5000	4000	400	300	560	30	5000x2180x3500
400T/6000	4000	6000	5000	400	300	560	30	6000x2180x3800
500T/4000	5000	4000	3100	400	300	600	37	4000x2250x3700
500T/5000	5000	5000	4000	400	300	600	37	5000x2250x3700
500T/6000	5000	6000	5000	400	300	600	37	6000x2300x3800
600T/4000	6000	4000	3100	400	300	600	45	4000x2400x3700
600T/5000	6000	5000	4000	400	300	600	45	5000x2400x3700
600T/6000	6000	6000	5000	400	300	600	45	6000 x 2400 x 3800

DA-41S Control System

Servo control technology
4.7 " high-brightness LCD screen, multi-language interface
Parameter setting for press brake die, programming of the bending angle
100 programs stored, 25 steps per program
Processing quantity counting and power-off memory functions
mm/inch conversion

Standard Configurations

Main motor from Siemens
Ball screw and linear rail from Taiwan HIWIN
Electrical system from French SCHNEIDER
Oil pump from Sunny
Manifold valve from REXROTH
Standard dies
Clamping system
Front arms
Servo motor
Foot switch

Optional

Safety light curtain
Dual guide rail crossbar
Clamping system
Sectional CNC tooling