Rollover Car Wash Machine CF-360 (EU Type)

Rollover Car Wash Machine CF-360 (EU Type)
Request a Quote

The car wash system EU type (CF-360) is a car wash machine with tire brushes, which clean the tires during the washing process, improving the car washing completeness. The double powerful mute dryers are used to increase the drying performance. The table below shows the basic information about the car wash system EU type.

Parameters
Model CF-360
Dimension L*W*H: 2.4m×3.6m×2.9m
Rail length: 9m Rail distance: 3.2m
Assembling Range L*W*H:10m×3.7m×3.1m
Moving Range L*W: 10000mm×3700mm
Voltage Voltage AC380V 50Hz Capacitance 12KVA
Water Supply DN25mm water flow rate≥80L/min
Air Pressure 0.75~0.9Mpa air flow rate≥0.1m3/min
Ground Flatness Deviation≤10mm
Applicable Vehicles Sedan/jeep/minibus within 10 seats
Applicable Car Dimension L*W*H: 5.4m×2.1m×2.1m
Washing Time Normal washing: 3'20''
Fine washing: 7'10''
Advantages
  • Fully automatic: microcontroller unit (MCU) ensures high efficiency and low failure rate, and allows for remote upgrading.
  • The corrosion resistance of the galvanized door-shaped frame of the vehicle washing equipment is the 10-20 times that of hot galvanized plate, increasing the service life.
  • Two powerful air mute dryers can follow contours of vehicles to improve the drying effect.
  • Foam and water wax proportioning system is easy to operate.
  • Two-Click washing method simplifies operation.
  • Built-in self-diagnose system can recognize and remove obstacles during car washing.
Configurations
Standard Devices Optional Devices
Shampoo spray system Undercarriage wash system
Water wax spray system Automatic washing mode
Side and overhead contour-following drying system
Equipment data intellectualization
Self-diagnose system
Related products
Send Message
Inquiry
Inquiry