Electric Resistance Welding Equipment, 230KVA Spot DC Welder
With 230KVA power, this electric resistance welding equipment will weld aluminum plates with a thickness of 2.5+2.5mm and iron plates with a thickness of 4.5+4.5mm. The maximum short-cut current of the 230KVA spot DC welder is 57KA, and the maximum pressing force is 15000N. The equipment is easy to operate with PLC touch screen control, and the current can be monitored in real time to ensure the current consistency of each welding spot.
The welding head is made of high quality conductive material with low impedance and high efficiency, and features an energy saving performance. The 230KVA spot DC welder uses a water-cooling system with a flow rate of 25L/min to ensure the rapid cooling of the welding equipment after running at a full load and ensure the normal operation.
The basic information of the 230KVA spot DC welder is shown as below. For more information or customization services, please contact us directly.
Parameters| Model | DTBZ-230 |
| Rated capacity | 230KVA |
| Rated voltage input | 380V |
| Inverter frequency | 1000HZ |
| Max short-cut current | 57KA |
| Max welding input | 345KVA |
| Duty cycle | 20% |
| Arm dimension | 220*480mm |
| Max pressing force | 15000N |
| Electrode stroke | 150mm |
| Consumer of cooling water | ≥25L/min |
| Electrode head | Φ20mm |
| Electrode holder | Φ30mm |
| Electrode arm | Φ79mm |
| Projection platform | 180*200mm |
| Max Welding ability | Alu:2.5+2.5mm |
| iron:4.5+4.5mm |
