Single Colour Sandal Injection Moulding Machine, EA124Q B/EA124Q BV
This injection moulding machine is made for producing quality foam and non-foam monochromatic soles, sandals and slippers. The applicable materials include TPR, PVC and PUR. What makes this injection press so popular is that it is equipped with 24 molds and can produce 12 pairs of shoes at a time.
| Item | Unit) | ||
| Raw materials | TPR, PVC, PUR (blowing) | ||
| Mould structure | Flat | V type | |
| Stations | 24 | 24 | |
| Screw diameter | mm | 70 | |
| Maximum injection volume | CC | 769 | |
| Injection pressure | MPa | 70 | |
| Clamping force | Tons | 60 | |
| Yield | Pairs/hour | 100-150 | |
| Mould space | mm | 500*240*240 | 500*240*280 |
| Heating power | kW | 8 | |
| Total power | kW | 32.5 | |
| Dimensions | cm | 580×360×220 | 580×360×250 |
| Machine weight | Tons | 6.5 | 7 |
| Oil consumption | L | 600 | |
-
Water cooling system
-
Drying hopper
-
Mould manipulator
-
Energy-saving hydraulic servo control system
- This sandal injection moulding machine is produced in integrated structure that allows for stable and durable operation;
- Screws rods of this injection moulding machine is made through special techniques, which ensures excellent durability;
- The sandal injection machine has a block cylinder that prevents leakage and insulates heat;
-
Efficient air blowing system is installed to improve the quality and reduce 30% weight of the goods to be made;
-
PLC control system with industrial human-machine interface (HMI) is easy to use;
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo motor and automatic mould manipulator are optional so as to reduces energy consumption and labour intensity;
-
Several safety measures have been adopted, including:
-
Safety sign
-
Emergency stop button
-
Rotary table anti-lifting switch
-
The purposes of different measures are that the safety sign indicates potentially dangerous zones; photoelectric switch can timely shut down the injection moulding machine if operators accidentally extend their hands into it; emergency stop button allows operators to shut down the injection moulding machine when finding something unusual happens; turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from being separated from the wheel.
In addition to the above-mentioned measures, this injection moulding machine is equipped with other devices. Safety door is installed to allow operators to shut down the injection machine when malfunctions happen; safety net is set up to prevent misoperation.
-
Cooling tower is installed to bring down the temperature of hydraulic oil and raw materials;
-
Crusher is used to recycle used materials;
-
Vertical mixer blends materials with different colours and turn them into the same colour;
-
Air compressor will be connected to the injection moulding machine to supply air;
-
Drying system eliminates water in air so as to avoid bubbles in finished products and make better foam soles;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Open-end wrench | 6-24 | 8 sets |
| Phillips screwdriver (small) | / | 2pcs |
| Phillips screwdriver (large) | / | 1pc |
| Adjustable wrench | 250mm | 1pc |
| Heating ring | Ø120*80 mm | 1pcs |
| Heating ring | Ø70*50 mm | 1pc |
| Heating rod | Ø15.8*100 mm | 2pcs |
| Proximity switch | Ø 25*25mm | 1pc |
| Proximity switch | Ø 12*12mm | 1pc |
| Thermoelectric coupling | K type/5M | 2pcs |
| Oil seal | / | 2pcs |
| Plugging rod | / | 1pc |
| Plugging bushing | / | 1pc |
| Copper gasket | / | 1pc |
| Injection nozzle | / | 1pc |
| User manual | / | 1 |
