Single Colour Sandal Injection Moulding Machine, EA120Q A/EA124Q A
This injection moulding machine is specially designed for sandals. To be specific, it can produce monochromatic foam or non-foam soles, sandals and slippers. The single colour sandal injection moulding machine has 12 sets of molds and can make 12 pairs of shoes at a time.
| Item | Unit | | | |
| Raw materials | TPR, PVC, PUR (blowing) | |||
| Stations | 20 | 24 | ||
| Screw diameter | mm | 70 | ||
| Maximum injection volume | CC | 769 | ||
| Injection pressure | MPa | 70 | ||
| Clamping force | Tons | 60 | ||
| Yield | Pairs/hour | 80-120 | 100-150 | |
| Mould space | mm | 500*240*240 | ||
| Heating power | kW | 8 | ||
| Total power | kW | 32.5 | ||
| Dimensions | cm | 580×360×200 | ||
| Machine weight | Tons | 5.8 | 6.3 | |
| Oil consumption | L | 600 | ||
-
Water cooling system
-
Drying hopper
-
Mould manipulator
-
Energy-saving hydraulic servo control system
- High quality screw rods made through special techniques are installed, ensuring exclusive durability;
- Block cylinder is designed with special structure, providing heat insulation and leakage resistance performance;
-
Powerful air blowing system has been installed to realize efficient in-feed and out-feed of air, which helps make quality products with 30% less weight;
-
This injection moulding machine has a user-friendly PLC control system with industrial human-machine interface (HMI);
-
PLC control system
-
PLC
-
HMI interface
-
-
Servo motor and automatic mould manipulator are optional to save energy and reduce labour intensity;
-
Multiple safety measures have been taken, including:
-
Safety sign
-
Emergency stop button
-
Rotary table anti-lifting switch
-
- To be specific, the safety sign will remind people of potentially dangerous zones;
- Photoelectric switch can timely shut down the injection moulding machine to prevent operators accidentally reach out their hands into it;
- Emergency stop button allows operators to shut down the injection moulding machine when finding something unusual happens;
- Turn table anti-lift switch sends electric signals to shut down the injection moulding machine to prevent the turn table from being separated from the wheel.
Apart from these safety components, this footwear injection machine is equipped with other devices. Safety door is installed to allow operators to shut down the injection machine when malfunctions happen; safety net is set up to prevent misoperation.
-
Cooling tower is installed to bring down the temperature of hydraulic oil and raw materials;
-
Crusher is used to recycle used materials;
-
Vertical mixer blends materials with different colours and turn them into the same colour;
-
Air compressor will be connected to the injection moulding machine to supply air;
-
Drying system eliminates water in air so as to avoid bubbles in finished products and make better foam soles;
| Parts list | ||
| Toolbox | / | 1pc |
| Allen key | 1.5-10 | 9 sets |
| Open-end wrench | 6-24 | 8 sets |
| Phillips screwdriver (small) | / | 2pcs |
| Phillips screwdriver (large) | / | 1pc |
| Adjustable wrench | 250mm | 1pc |
| Heating ring | Ø120*80 mm | 1pcs |
| Heating ring | Ø70*50 mm | 1pc |
| Heating rod | Ø15.8*100 mm | 2pcs |
| Proximity switch | Ø 25*25mm | 1pc |
| Proximity switch | Ø 12*12mm | 1pc |
| Thermoelectric coupling | K type/5M | 2pcs |
| Oil seal | / | 2pcs |
| Plugging rod | / | 1pc |
| Plugging bushing | / | 1pc |
| Copper gasket | / | 1pc |
| Injection nozzle | / | 1pc |
| User manual | / | 1 |
