Die Spotting Press YC High Precision Series
A reasonably designed die spotting press makes the inspection and repair of complex molds much easier.
The YC die spotting press features a high precision, and is equipped with four spotting oil cylinders arranged in a square. This ensures a more uniform mold plate force, and a smaller deformation coefficient. All of these are not things found in a traditional spotting machine where the spotting oil cylinders are arranged in a line.
We provide 9 types of die spotting presses, with the pressure ranging from 68T to 600T, thus ensuring they can handle multiple mold types, including die casting molds, injection molds, stamping molds and more.
Type selection
According to different pressure capacities, we offer 9 different machine types, with a size varying from 68T to 600T. The mixed mold size they can process is 1.5m×1.2m.
Die spotting presses are large scale equipment. A small die spotting press requires less land, and stands at a height of less than 4m. However, the largest option features a length and height close to 10 meters. Therefore customers must pay attention to their requirements and space when choosing an equipment piece.
68T-300T Die Spotting PressType | | 68JM-YC | 100JM-YC | 160JM-YC | 200JM-YC | 300JM-YC |
Pressure capacity | T | 68 | 100 | 160 | 200 | 300 |
Open capacity | T | 22 | 25 | 38 | 45 | 56 |
Ejecting capacity | T | 2.2 | 2.2 | 6.3 | 6.3 | 6.3 |
Min distance between two workbenches | mm | 150 | 200 | 200 | 200 | 200 |
Max distance between two workbenches | mm | 1150 | 1500 | 1700 | 1900 | 2300 |
Dimension of work bench | mm | 1000×800 | 1400×1100 | 1600×1300 | 1800×1500 | 2200×1800 |
Oventurn capacity | T | 2.5 | 4 | 8 | 10 | 18 |
Carrying capacity of workbench | T | 4 | 8 | 16 | 20 | 36 |
Shift-out stroke of lower workbench | mm | 2170 | 2950 | 3210 | 3620 | 4365 |
Ejection shroke | mm | 220 | 220 | 300 | 300 | 300 |
Overturn angle of upper workbench | ° | 180 | 180 | 180 | 180 | 180 |
Motor power | kW | 11 | 15 | 18.5 | 22 | 30 |
Min mold size(length×width) | mm | 300×300 | 400×400 | 500×500 | 540×540 | 650×650 |
External dimension length×width×high | mm | 4185×1770×3690 | 5380×2325×4630 | 5580×2590×5240 | 6250×2790×5695 | 7410×3400×6860 |
Weight | T | 9.4 | 19 | 26 | 31 | 52 |
Type | | 350JM-YC | 400JM-YC | 500JM-YC | 600JM-YC |
Pressure capacity | T | 350 | 400 | 500 | 600 |
Open capacity | T | 70 | 80 | 120 | 150 |
Ejecting capacity | T | 11.2 | 11.2 | 21.5 | 21.5 |
Min distance between two workbenches | mm | 400 | 400 | 400 | 400 |
Max distance between two workbenches | mm | 2500 | 2500 | 3000 | 3200 |
Dimension of work bench | mm | 2800×2000 | 3000×2000 | 3100×2100 | 3500×2500 |
Oven turn capacity | T | 25 | 25 | 30 | 35 |
Carrying capacity of workbench | T | 50 | 50 | 60 | 70 |
Shift-out stroke of lower workbench | mm | 4800 | 4800 | 4980 | 5980 |
Ejection stroke | mm | 300 | 300 | 350 | 350 |
Overturn angle of upper workbench | ° | 180 | 180 | 180 | 180 |
Motor power | kW | 37 | 45 | 45 | 55 |
Min mold size(length×width) | mm | 850×850 | 1000×850 | 1000×850 | 1500×1200 |
External dimension length×width×high | mm | 8080×4190×7205 | 8120×4470×7405 | 8410×4610×8525 | 9825×5080×9275 |
Weight | T | 75 | 87 | 112 | 137 |
Note: The technical parameters are subject to change without prior notice.
Reliable work
During the spotting process, operators need to simply place two molds on the rolling bolster and upper platen, respectively. When the molds are fixed in place using a hydraulic clamping system, the equipment will begin to operate. The rolling bolster moves forward, while at the same time, the upper platen moves upwards and reverses to 180 degrees. By doing so, the two piece mold will effectively complete spotting in their positions.
High spotting precision
Four guide pillars ensure the entire unit is stable and reliable, and the parallel position of the mold can be adjusted simply by shifting the guide pillar nut positions, thus ensuring a high spotting precision. We also use an elastic mold plate to guarantee the high spotting precision under a high pressure.
Complete protective measures
Once the rolling bolster returns to its original position, our hydraulic machinery safety will attach and lock it automatically, which makes mold and machinery operation safer and more secure.
Servo drive system
Serve driving using an optional servo motor can help reduce the die spotting press' oil temperature and energy consumption.
Magnetic mold plate
Magnetic mold plates can be used in conjunction with the die spotting press in order to achieve a reliable and fast die change.
Hydraulic clamping system
We offer a variety of hydraulic clamping systems that match the die spotting press, thus helping customers achieve a fast, reliable die change.