Single Wall Heat Shrink Tubing Manufacturer

Single Wall Heat Shrink Tubing

Request a Quote

About Us: http://heatshrink-tubing.com/1-1-5-single-wall-heat-shrink-tubing.html

Single Wall Heat Shrink Tubing, RSFR-HCB

Model: RSFR-HCB

Ultra thin wall, very flexible heat shrinkable tubing

RSFR-HCB heat shrink tubing is a shrinkable tube used to insulate wires, and protect wires and cables from abrasion and mechanical damage. This single wall shrinkable tubing is also suitable for lightweight wire-harness covering and flame-retardant covering.

Features

Shrink ratio: 2:1
Ultra thin wall
Very flexible
Flame retardant

Continuous operating Temperature: -55℃ to 125℃
Fully shrink temperature: ≥110℃
RoHS

Typical Applications

Electrical insulation
Electronic component protection
Strain relief for connectors and splices

Protection against mechanical damage and abrasion
Moisture and corrosion resistance
Wire bundling
Wire harnessing

Technical Data

Property	Test Method	Typical Performance
Tensile strength (MPa)	ASTM D 2671	≥10.4
Ultimate elongation (%)	ASTM D 2671	≥200
Tensile strength after heat aging (MPa)	158℃×168h	≥7.3
Ultimate elongation after heat aging (%)	158℃×168h	≥100
Longitudinal change (%)	ASTM D 2671	-5%～ 5%
Flammability	ASTM D 2671 C method	VW-1
Dielectric strength (kV/mm)	ASTM D 149	≥15
Volume resistivity (Ω.cm)	ASTM D 876	≥10¹⁴

Dimensions

Size		As Supplied	After Recovery		Standard Package
inch	mm	Internal Diameter (mm)	Internal Diameter (mm)	Wall Thickness (mm)	Spool Length (m/spool)
1/16	1.0	1.40±0.20	≤0.65	0.20±0.10	200
	1.5	1.90±0.20	≤0.85	0.20±0.10	200
3/32	2.0	2.40±0.20	≤1.00	0.22±0.10	200
	2.5	2.90±0.20	≤1.30	0.25±0.10	200
1/8	3.0	3.40±0.20	≤1.50	0.28±0.10	200
	3.5	3.90±0.20	≤1.80	0.28±0.10	200
	4.0	4.40±0.20	≤2.00	0.30±0.10	200
3/16	4.5	4.90±0.20	≤2.30	0.30±0.10	200
	5.0	5.50±0.20	≤2.50	0.32±0.10	100
1/4	6.0	6.50±0.20	≤3.00	0.32±0.10	100
5/16	7.0	7.50±0.30	≤3.50	0.32±0.10	100
	8.0	8.50±0.30	≤4.00	0.32±0.10	100
3/8	9.0	9.50±0.30	≤4.50	0.35±0.10	100
	10.0	10.50±0.30	≤5.00	0.35±0.10	100
	11.0	11.50±0.30	≤5.50	0.40±0.10	100
1/2	12.0	12.50±0.30	≤6.00	0.40±0.10	100
	13.0	13.50±0.30	≤6.50	0.40±0.10	100
	14.0	14.50±0.30	≤7.00	0.40±0.10	100
5/8	15.0	15.50±0.40	≤7.50	0.40±0.10	100
	16.0	16.50±0.40	≤8.00	0.40±0.10	100
	17.0	17.50±0.40	≤8.50	0.40±0.10	100
3/4	18.0	18.50±0.40	≤9.00	0.42±0.10	100
	20.0	20.50±0.50	≤10.0	0.45±0.10	100
	22.0	22.50±0.50	≤11.0	0.45±0.10	100
1	25.0	25.50±0.50	≤12.5	0.45±0.10	50
	28.0	28.50±0.50	≤14.0	0.60±0.10	50