Fiber Optic Patch Cord & Fiber Optic Pigtail
Product Photos
Both the fiber optic patch cord and the fiber optic pigtail can be classified into different types according to the kinds of connectors attached to them: FC, SC, LC, MU, and ST. High quality ceramic ferrules ensure the patch cable and the fiber pigtail have low insertion loss and full standards compliance. Typical uses for our patch cord and fiber pigtail are in telecommunication networks, LANs of CATV, test equipment, and data transmission systems. Please note that the patch cord is usually known as the patch cable, jumper, or fiber optic jumper.
Please note that the patch cord is usually known as the patch cable, jumper, or fiber optic jumper.
Features of Fiber Optic Patch Cord & Fiber Optic Pigtail
Low insertion loss and high return loss
Good repeatability and interchangeability
PC, UPC, APC polishing
FC, SC, ST, LC, MU connector
Suitable for high-speed, high-capacity optical fiber transmission system
Providing single mode/ multimode patch cord and pigtails
Fiber diameter: Φ0.9mm, Φ2.0mm, Φ3.0mm
Length/Type: According to customers’ requirements
Applications of Fiber Optic Patch Cord & Fiber Optic Pigtail
Optical fiber communications system
Optical fiber access networks
Optical fiber CATV
Optical fiber test equipments
Optical fiber data communication
Technical Standards
Technical Parameters
NO. | Item | Unit | Single Mode | Multi-Mode | ||
1 | Insertion loss | dB | ≤ 0.3 | ≤ 0.3 | ||
2 | Return loss | dB | PC | UPC | APC | / |
≥45 | ≥ 50 | ≥55 | ≥ 45 | |||
3 | Repeatability | dB | 0.1 | |||
4 | Working Times | Times | ≥1000 | |||
5 | Operating Temperature | °C | -40-85 | |||
6 | Optical Cable Diameter | mm | φ0.9, φ2.0, φ3.0 |
Specifications
Item | PC Polishing | APC Polishing | Schematic Diagram | ||
Ferrule Diameter(mm) | 2.5 | 1.25 | 2.5 | 1.25 | |
Radius of Curve (mm) | 10~25 | 7~25 | 5~15 | ||
Fiber Height (um) | -100~50 | ±50 | |||
Apex Offset(um) | ±50 | ±50 |
Package
Ordering Information A-B-C-D-E-F-G