KX Thermocouple Extension Wire(ANSI Color Coded Wire 2x7/0.2mm)
MICC can provide various thermocouple types and thermocouple wire types. On this page you will see the detailed parameters of our ANSI Color Coded KX thermocouple extension wire (2×7/0.2mm). Welcome to contact us at any time if you want any further information about our products.
Material of the ANSI Color Coded KX Thermocouple Extension Wire
1. Conductors
Positive: chromel
Negative: alumel
2. Insulation: fiber glass
3. Overall sheath: SSB
1. Subject
This KX thermocouple wire (2×7/0.2mm) comes with stranded wire, which is covered by metallic overbraid. The standard tolerances and color code are both designed according to the ANSI standard.
A. Conductor
Stranded thermocouple extension wire
| Conductor size (AWG) | Quantity of strands and gauge |
| 24mm | 7/0.2mm |
B. Insulation
Braided fiberglass (400℃)
Nominal insulation thickness: 0.30±0.2mm
Color code:
Positive: yellow
Negative: red
C. Assembly
The two conductors (positive and negative) are in parallel construction.
D. Overall sheath
Braided fiberglass (400℃)
Nominal sheath thickness: 0.28±0.2mm
Color code: yellow or white trace
3. Dimensions and Tolerance of the ANSI Color Coded KX Thermocouple Extension Wire
Dimensions/tolerances (mm): (2.20±0.2)×(3.15±0.2)
| Temperature range | Standard tolerance* | Special tolerance* |
| 0℃ - 400℃ | ±2.2℃ or 0.75% | ±1.1℃ or 0.4% |
* whichever is greater
The available thermocouple type includes KX, JX, TX, EX, NX, RX, SX and other compensating cable like KCA, KCB and so on.
