JX Thermocouple Extension Wire(Fiberglass Insulated DIN Color Coded Wire 2x7/0.2mm)
The fiberglass insulated DIN color coded JX thermocouple extension wire (2×7/0.2mm) is a kind of thermocouple accessory. If you have any questions after reading the following information, please contact us at any time.
Material
1. Conductors
Positive: iron
Negative: constantan
2. Insulation: braided fiberglass
1. Subject
This specification is for our fiberglass insulated DIN color coded JX thermocouple extension wire (2×7/0.2mm). The stranded wire and standard tolerance of this thermocouple wire are designed according to the DIN standards.
A. Conductor
Standard thermocouple extension wire
Conductor size (AWG) | Quantity of strands and gauge |
24mm | 7/32 AWG (0.2mm) |
B. Insulation
Braided fiberglass (400℃)
Nominal insulation thickness: 0.25mm
Color code (DIN):
Positive: red or white/red trace
Negative: blue or white/blue trace
C. Assembly
The two conductors (positive and negative) of the fiberglass insulated DIN Color Coded JX thermocouple extension wire (2×7/0.2mm) are in parallel.
D. Overall sheath
Silicone rubber (400℃)
Nominal sheath thickness: 0.25 mm
Color code: blue or white/blue trace
E. Metal overbraid
Material: stainless steel round wire braided with blue tracer
Minimum coverage: 85%
3. Dimensions and Tolerance
Dimensions/tolerance (mm): 2.2±0.2×3.4±0.2
Temperature range | Standard tolerance* | Special tolerance* |
0℃ - 400℃ | ±2.2℃ or 0.75% | ±1.1℃ or 0.4% |
* whichever is greater
Thermocouple type available: KX, JX, TX, EX, NX, RX,SX and other compensating cable like KCA, KCB and so on.
Color code available: