Medium Voltage Cold Shrinkable Power Cable Accessories LSR
Model No.
LIM1510-35A/B, LIM1510-45A/B
Product Description
The medium voltage Cold Shrinkable Power Cable Accessories LSR is a two-component platinum catalyzed liquid silicone rubber. The two components of this product, termed A and B, are transparent and grey respectively, and the mixing ratio for A:B should be 1:1. The tracking resistance of this LSR is class 1A3.5 according to IEC60587 standard. Our Cold Shrinkable Power Cable Accessories LSR features high extensibility, good anti-tracking index, high tear resistance, etc. It supports injection molding and fast vulcanization. This LSR is used to Cold shrinkage termination, insulation tube, joint and breakout, etc.
Storage
Keep sealed and store in a cool place below 30℃ before usage. It has a shelf life of 12 months.
Usage
When operate, part A and B can be injected directly to the heated mold from the original containers by mean of a metering and mixing unit. At the mold temperature of 90-150℃, silicone rubber cures within minutes according to the size. The pot life is 3-7days after mixing under 23℃. Clean pipe and machine when machine stoped for long time.
Packing
Our Cold Shrinkable Power Cable Accessories LSR is packed in a 20kg or 200kg barrel.
Before curing | Physical properties | Test method | Unit | LIM1510-35A/B | LIM1510-45A/B |
Appearance (Color) | Transparent for A, gray for B | ||||
Solid content | % | 100 | 100 | ||
Viscosity | DIN53019 | mPa.s | (40 ~ 80)×104 | (40 ~ 80)×104 | |
After curing | Specific gravity | D792 | 1.13 | 1.13 | |
SHORE Hardness | D2240 | A | 34 ~ 37 | 34 ~ 37 | |
Tensile strength | D412 | MPa | ≥ 8.5 | ≥ 8.5 | |
Elongation at Break | D412 | % | ≥ 800 | ≥ 800 | |
Tear strength | D624B | KN/m | ≥ 30 | ≥ 30 | |
Tension Set: Keep 300% extension for 15 hrs at 120 ℃ | D412 DIE C | % | ≤ 8 | ≤ 8 | |
Volume resistivity | IEC60093 | Ω.cm | 1.9×1014 | 1.0×1015 | |
Dielectric constant | IEC60250 | 2.8 | 2.8 | ||
Dissipation factor | IEC60250 | 0.0016 | 0.0016 | ||
Tracking resistance | IEC60587 | grade | 1A3.5 | 1A4.5 | |
Dielectric strength | IEC60243 | KV/mm | 26 | 26 |
Note:
The viscosity is measured by NDJ-79 rotary viscosimeter Molding condition: High pressure curing for 10 minutes at 140℃ Vulcanization condition: Curing for four hours at 180℃ GB stands for Chinese national standard. The above technical properties are for reference only. For detailed molding conditions, please contact us directly.
SQUARE Silicone is a liquid silicone materials manufacturer and supplier, based in China. As a result of their high quality and low prices, our products are very popular with customers in many countries, such as India, Malaysia, Thailand, Korea, Pakistan, Egypt, Turkey, Nigeria, Poland, Ukraine, the United Kingdom, the United States, Australia, Brazil, Chile, Mexico, Taiwan, and so on.
Shenzhen SQUARE Silicone Co., Ltd.
Address:Building 9th, 3rd Phase, Hemei Industrial Park, Pingzi Road, Pingdi Block, Shenzhen, PR China 518117
Tel.:
(Overseas)
Ext:837
Fax: 86-755-28805428