Carbide Rods
Request a Quote
Rods with Central Coolant Hole
L=330mm (Tol.0/ 5) Unit: mm
| Diameter | Hole Diameter | Centre Offset | T10 | T12UF | ||||
| ΦD | Tol. Of raw | ΦD | Tol. | a | raw | H6 | raw | H6 |
| 3 | 0.30/ 0.50 | 0.50 | ±0.10 | 0.10 | ◇ | ○ | ◇ | ○ |
| 4 | 0.30/ 0.50 | 0.80 | ±0.10 | 0.10 | ◇ | ○ | ◇ | ○ |
| 5 | 0.30/ 0.50 | 0.80 | ±0.10 | 0.13 | ◇ | ○ | ◇ | ○ |
| 6 | 0.30/ 0.50 | 1.00 | ±0.15 | 0.15 | ◇ | ○ | ◇ | ○ |
Request a quote
Rods with 2 Parallel Coolant Holes
L=330mm (Tol.0/ 5) Unit: mm
| Diameter | Hole Diameter | Bolt Circle | Centre Offset | T10 | T12UF | |||||
| Tol. of raw | Φd | Tol. | TK | Tol. | a | raw | h6 | raw | h6 | |
| 4 | 0.30/0.50 | 0.80 | ±0.10 | 1.80 | 0,-0.15 | 0.10 | ◇ | ○ | ◇ | ○ |
| 5 | 0.30/0.50 | 0.80 | ±0.10 | 2.00 | 0,-0.15 | 0.13 | ◇ | ○ | ◇ | ○ |
| 6 | 0.30/0.50 | 1.00 | ±0.15 | 3.00 | 0,-0.20 | 0.15 | ◇ | ○ | ◇ | ○ |
| 7 | 0.30/0.60 | 1.00 | ±0.15 | 3.50 | 0,-0.20 | 0.15 | ◇ | ○ | ◇ | ○ |
Request a quote
Solid Long Rods-Metric
L=310mm/ 330mm (Tol.: 0/ 5mm) Unit: mm
| Diameter | T10 | T10UF | T12UF | ||||
| ΦD | Tol. Of raw | raw | h6 | raw | h6 | raw | H6 |
| 2 | 0.15/ 0.30 | ◇ | ◇ | ◇ | |||
| 3 | 0.15/ 0.30 | ◇ | ◇ | ◇ | |||
| 4 | 0.30/ 0.50 | ◇ | ○ | ◇ | ○ | ◇ | ○ |
| 5 | 0.30/ 0.50 | ◇ | ○ | ◇ | ○ | ◇ | ○ |
Request a quote
Solid Long Rods-Inch
L=310mm/ 330mm (Tol.: 0/ 5mm) Unit: mm
| Diameter | T10 | T10UF | T12UF | ||||
| ΦD | Tol. Of raw | raw | h6 | raw | h6 | raw | H6 |
| 2 | 0.15/ 0.30 | ◇ | ◇ | ◇ | |||
| 3 | 0.15/ 0.30 | ◇ | ◇ | ◇ | |||
| 4 | 0.30/ 0.50 | ◇ | ○ | ◇ | ○ | ◇ | ○ |
| 5 | 0.30/ 0.50 | ◇ | ○ | ◇ | ○ | ◇ | ○ |
Request a quote
Ground Rods with Chamfer
L Tol.:0/ 1.0mm) Unit: mm
| ΦD | L | C | T10 | T10UF | T12UF | |||
| H5 | h6 | H5 | h6 | raw | H6 | |||
| 3 | 40 | 0.4 | ◎ | ○ | ◎ | ○ | ◎ | ○ |
| 3 | 50 | 0.4 | ◎ | ○ | ◎ | ○ | ◎ | ○ |
| 3 | 70 | 0.4 | ◎ | ○ | ◎ | ○ | ◎ | ○ |
| 3 | 100 | 0.4 | ◎ | ○ | ◎ | ○ | ◎ | ○ |
Request a quote
Ground Rods with Chamfer-Inch
L (Tol.0/ 1/16) Unit: mm
| ΦD | L | Chamfer Size | T10 | T12UF | |||
| C | ToL | H6 | H5 | H6 | h5 | ||
| 1/8 | 1-1/2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 2-1/2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 3 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
Request a quote
Rods with 2 Helical Coolant Holes
Rods with 2 Helical Coolant Holes (30°)
L (Tol.0/ 1/16) Unit: mm
| ΦD | L | Chamfer Size | T10 | T12UF | |||
| C | ToL | H6 | H5 | H6 | h5 | ||
| 1/8 | 1-1/2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 2-1/2 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
| 1/8 | 3 | 0.015 | ±0.004 | ○ | ◉ | ○ | ◉ |
Request a quote
Rods with 2 Helical Coolant Holes (40°)
L=330mm (Tol.0/ 5) Unit: mm
| Diameter | Hole Diameter | Bolt Circle | Pitch(±0.5°) | Centre Offset | T10 | T10UF | |||||||
| ΦD | Tol. of raw | Φd | Tol. | TK | Tol. | P | Tol. | a | raw | h6 | raw | h6 | |
| 6 | 1.1/ 1.5 | 0.50 | ±0.10 | 2.20 | 0/-0.4 | 22.46 | -0.39 | 0.40 | 0.15 | ◇ | ○ | ◇ | ○ |
| 7 | 1.1/ 1.5 | 0.65 | ±0.15 | 2.40 | 0/-0.6 | 26.21 | -0.46 | 0.47 | 0.15 | ◇ | ○ | ◇ | ○ |
| 8 | 1.1/ 1.5 | 0.65 | ±0.15 | 2.70 | 0/-0.6 | 29.95 | -0.53 | 0.54 | 0.15 | ◇ | ○ | ◇ | ○ |
| 9 | 1.1/ 1.5 | 0.75 | ±0.15 | 3.20 | 0/-0.8 | 33.70 | -0.59 | 0.60 | 0.20 | ◇ | ○ | ◇ | ○ |
Request a quote
Rods with 3 Helical Coolant Holes
Rods with 3 Helical Coolant Holes (30°)
L=330mm (Tol.0/ 5) Unit: mm
| Diameter | Hole Diameter | Bolt Circle | Pitch(±0.5°) | Centre Offset | T10 | T10UF | |||||||
| ΦD | Tol. of raw | Φd | Tol. | TK | Tol. | P | Tol. | a | raw | h6 | raw | h6 | |
| 6 | 0.60/ 1.10 | 0.70 | ±0.10 | 2.75 | 0/-0.4 | 32.65 | -0.65 | 0.67 | 4° | ◇ | ○ | ◇ | ○ |
| 6 | 0.60/ 1.10 | 0.50 | ±0.10 | 2.90 | 0/-0.4 | 32.65 | -0.65 | 0.67 | 4° | ◇ | ○ | ◇ | ○ |
| 8 | 0.60/ 1.10 | 1.00 | ±0.15 | 4.00 | 0/-0.4 | 43.53 | -0.86 | 0.89 | 4° | ◇ | ○ | ◇ | ○ |
| 8 | 0.60/ 1.10 | 0.70 | ±0.10 | 4.00 | 0/-0.4 | 43.53 | -0.86 | 0.89 | 4° | ◇ | ○ | ◇ | ○ |
Request a quote
Rods with 3 Helical Coolant Holes (40°)
L=330mm (Tol.0/ 5) Unit: mm
| Diameter | Hole Diameter | Bolt Circle | Pitch(±0.5°) | Centre Offset | T10 | T10UF | |||||||
| ΦD | Tol. of raw | Φd | Tol. | TK | Tol. | P | Tol. | a | raw | h6 | raw | h6 | |
| 6 | 1.1/ 1.5 | 0.50 | ±0.15 | 2.20 | 0/-0.3 | 22.46 | -0.39 | 0.40 | 4° | ◇ | ○ | ◇ | ○ |
| 8 | 1.1/ 1.5 | 0.65 | ±0.15 | 2.70 | 0/-0.3 | 29.95 | -0.53 | 0.54 | 4° | ◇ | ○ | ◇ | ○ |
| 10 | 1.1/ 1.5 | 0.80 | ±0.15 | 3.50 | 0/-0.5 | 37.44 | -0.66 | 0.67 | 4° | ◇ | ○ | ◇ | ○ |
| 12 | 1.1/ 1.5 | 0.90 | ±0.20 | 4.20 | 0/-0.5 | 44.93 | -0.79 | 0.80 | 4° | ◇ | ○ | ◇ | ○ |
Request a quote
Peel Grinding Carbide Rods
We have the ability to produce cylindrical tools through peel grinding operations. To guarantee that our clients use our products more effectively, we may modify them to meet various needs while maintaining outstanding performance, industry-leading quality, quick response, and competent after-sales service.
Request a quote
Related products
Send Message
Most Recent
More
Other Products
Videos
