Desiccant Filling Machine

Desiccant Filling Machine
Request a Quote

This desiccant filling machine is designed for aluminum spacer bending machines, and is controlled using a PLC control system. It can be used for the filling of automatic bent aluminum spacers and normal aluminum spacers.

Parameter:
  • Dimension: 1500×850×3650mm
  • Work pressure: 0.5~0.8MPa
  • Work Power: 220V
  • Flow control: about 24g/s
  • Filling speed: 8-12s/ (1m×1m 9a)
  • Aluminum spacer min: 6.5×5.5mm
  • Aluminum spacer max: 6.5×23.5mm
  • Weigh: 400Kg
Feature:
  • This desiccant filling machine can drill holes on the back of aluminum spacer, allowing it to be used for molecular sieve filling.
  • The filling height can be adjusted according to the aluminum spacer size.
  • The unique loading position helps to automatically fill the molecular sieve.
Equipment maintenance:
  • Check if there is water in the water separator before operating, as water needs to be regularly discharged.
  • Check if there are impurities or water in the filter, as the filter needs regular cleaning during operation.
  • Add oil for the air lubricator when needed.
  • According the equipment service conditions, change the drilling bit to an electric drill when the bit is dull.
  • Please do not adjust the speed regulating joint between the air cylinder
Related products
Send Message
Inquiry
Inquiry