Roll-On Sealing Sleeve

Roll-On Sealing Sleeve
Roll-On Sealing Sleeve
Roll-On Sealing Sleeve
Request a Quote

Our roll-on sealing sleeve is RoHS compliant, which is made of EPDM rubber material. The sleeve is filled with special lubricant at the inner side, making it easier to install.

Applications

The roll-on sealing sleeve is used for insulation and sealing, which is to provide protections from salt spray and water moisture. This can also be used for protection from electrical contacts during the periodic inspection, such as the joint protection of mine cables or cables for offshore wind turbines.

Features
  • Our product is reusable and recyclable, which can be installed and removed repeatedly, hence, can provide material cost savings.
  • The sleeves are heatless sealing products that do not require torches or any heat sources during the installation. The installing process is quick and simple, which is to just roll the sleeve over the area to be protected.
Technical Data
Property Test Method Standard Value
Ultimate Tensile ISO 37 ≥8.1MPa
Ultimate Elongation ISO 34 ≥8.1MPa
Ultimate Tensile after 136℃×168h ISO 37 9.5Mpa
Ultimate Tensile after 136℃×168h ISO 34 719.89
Water Absorption ISO 62 0.3%
Dielectric Strength IEC 60243 8kV (mm)
Volume Resistivity ASTM-D-2303 1.3x1015
Environmental Testing RoHS Meet the RoHS
Salt Spray Test GB2423 No crack with ultimate elongation 770% certified by SGS
Ozone Test GB7762 No crack certified by SGS.
Low Temperature Ultimate Elongation -60 ℃x4h 391.4%
Related products
Send Message
Inquiry
Inquiry