Multifunction Power Meter (DIN Rail Mount), ACR10R Series
DIN rail mounted power meter is externally equipped with Hall-effect Current Sensors, which has found wide applications in the industries consuming high energy such as iron and steel, smelting, welding and semiconductor. It's also suitable for real-time power monitoring and electric utility demand-side management in the Grid-connected photovoltaic power system.
Overload: 1.2 times the rated voltage (continuous); 2 times the rated voltage lasts for 1 second;
Power consumption: less than 0.2VA
Overload: 1.2 times the rated current (continuous); 10 times the rated current lasts for 1 second
Power consumption: less than 0.2VA
Display: LCD
Active energy: 0.5 level, 0.01Hz frequency
Reactive energy: 1 level
Storage temperature: -20℃~ 70℃
Relative humidity: 5%~95%, non-condensing
Altitude: ≤2500m
DIN rail mounted power meter is externally equipped with Hall-effect Current Sensors, which has found wide applications in the industries consuming high energy such as iron and steel, smelting, welding and semiconductor. It's also suitable for real-time power monitoring and electric utility demand-side management in the Grid-connected photovoltaic power system.
Featuring with easy wire connection, safe construction, reduced cost, and improved efficiency, the power meter integrates the measurement of all electrical parameters (including single- or three-phase current, voltage, active power, reactive power, apparent power, frequency, power factor), power monitoring and energy management, greatly contributing to energy efficiency improvement and cost savings. A wide variety of built-in interfaces are designed on the power meter available for externally connecting with other devices: RS485 serial communication and Modbus RTU port. Switch input and relay output design realizes remote signaling and remote control for the circuit breaker switch. Equipped with a LCD display, the parameters can be set and adjusted with ease.