Multi-Bag Filter Housing

Multi-Bag Filter Housing
Request a Quote

Multi-bag filter housing is used for coarse filtration and pre-filtration. This filtration system comes standard with No. 01 or No. 02 filter bag. 2 to 12 filter bags can be equipped for standard models. 24 filter bags at maximum can be installed on the filter to meet various types of flow requirements.

Applications

Multi-bag filter housings can be used in many applications as below:

  • Food and beverage
  • Biological engineering and pharmaceutical
  • Petrochemical and chemical
  • Automobile manufacturing
  • Petroleum and natural gas
  • Electronic and natural gas
  • Coating, paint, printing ink
  • Nuclear power, thermal power and waste water filtration
  • Liquid and gas purification
Features
  • Ensures high service life due to high flow and particulate holding capacity
  • Compact design reduces occupied floor space and the loss of liquid.
  • Side entry and bottom out ensure that liquid medium can be completely discharged, and the tangential position outlet is used for discharging pollution thoroughly.
  • Unique three-point hold down ensures a high-quality seal, avoiding side leakage of liquid.
  • The filter housing can be available with swing arm, eyebolt or quick-open design, making operation convenient and easy.
Operating conditions
  • Max. operating pressure: 1.0MPa
  • Max. operating temperature:150℃
Material
  • Housing: 304, 316L stainless steel
  • Eyebolt: 304 stainless steel
  • Adjustable leg assembly: 304 stainless steel
  • O-ring: EPDM, PTFE, Viton, Silicone
Connection
  • Connection of housing: Flange
  • Inlet/outlet: Flange, Tri-clamp, Thread
  • N3 Pressure gauge (option): 1/2’’ Female thread
  • N4Vent valve (option): 1/2’’ Male thread
  • N5 Drain value (option): 1/2’’ Male thread
Surface finish
  • Finish type: mechanical/ electrolytic polishing, sand blasting
  • Polishing precision: 0.6μm inner wall Ra<0.6μm, 0.8μm exterior wall Ra≤0.8μm, basket 0.6μm
Dimension parameters
  2P2S 4P4S 6P2S
  Top entry, bottom out Bottom entry, side out Top entry, bottom out Bottom entry, side out Top entry, bottom out Bottom entry, side out
Total height(mm) 1880 1530 2030 1600 2130 1700
The distance from inlet to center(mm) 300 360 400 440 450
Housing diameter(mm) Ф400 Ф500 Ф550 Ф650
The height from inlet to ground(mm) 1330 950 1425 975 1480 1000
The height from outlet to ground(mm) 300 400 350 400
Inlet/outlet Size(mm) 4’’ 4’’ 4’’

*Can be customized upon request

Selection table
QTY. of bag filter Model of bag filter Housing material Inet/outlet connection O-ring
1P 2S 4 F E
2P=2bag Pc 7P=7bag Pc 1S=1# bag: Ф180×430 4=304 F=Flange E=EPDM
3P=3bag Pc 9P=9bag Pc 2S=2#bag:Ф180×810 6=316L K=Tri-clamp P=PTEE
4P=4bag Pc 12P=12bag Pc     L=Thread V=Viton
6P=6bag Pc         S=Silicone
Related products
Send Message
Inquiry
Inquiry