Active Power Filter Reactor
Application
The active power filter reactor is deployed in single phase DC source and high frequency source to output harmonics at 10-20kHz high frequency. The wave filtering reactor can be cascaded or shunted into the system; when cascaded, it is mainly used to reduce harmonic current in circuits.
The active power filter can be applied to power source systems, high frequency DC source in new energy industry, UPS, etc.
Specification
Rated Current: ≤1000A
Rated Line Voltage: <1200V
Carrier Frequency: ≥10kHz
Switch Frequency: 10-30kHz
Reactance Strength: windings-ground 3000V AC/50Hz/60s without arcing or breakdown
Insulation Resistance: windings-ground 500V DC, ≥100MΩ
Inductor Noise: <65dB (tested 1 meter away from the inductor)
Protection Level: IP00
Insulation Level: level F/level H
Standard Conformed: IEC289, 1987 Reactors, GB10229-88 Reactors(IEC289: 1987)
Feature
1. The active power filter reactor is winded with varnished copper wires tightly in a tidy and reliable manner.
2. The reactor adopts vacuum pressure varnishing techniques, and features low noise during working.
